NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
62.908,99 US$
0.782168BTC
En stock
OWC
OWC 64GB DDR4 3200 PC4-25600 CL22 2Rx4 288-pin 1.2V ECC Registered RDIMM Dell P2MYX server RAM
A 64 GB DDR4 ECC registered DIMM running at 3200 MHz with CL22 latency for server and workstation upgrades
- Type288-Pin DDR4 ECC RDIMM
- CAS Latency22
- Voltage1.2V
- ECCYes
- Buffered/RegisteredRegistered
- Heat SpreaderNo
- 64GB capacity doubles server memory headroom
- DDR4 3200 CL22 delivers 25600 MB/s peak bandwidth
- ECC registered design corrects errors for uptime
- 2V operation cuts power draw per module
- Backward compatible with 2133, 2400, 2666, 2933 MHz systems
What it is
This is a single 64GB DDR4 3200 ECC registered RDIMM built to the PC4-25600 JEDEC standard with CL22 timing and 1.2V operation. It uses a 2Rx4 288-pin layout without a heat spreader and is sold new as a direct replacement for Dell P2MYX systems.
Who it suits
It suits administrators upgrading Dell PowerEdge servers or compatible workstations and NAS units that require registered ECC memory at 3200, 2933, 2666, 2400 or 2133 MT/s. It will not work in standard desktop motherboards, nor can it be mixed with unbuffered or load-reduced DIMMs.
Capacity and headroom
One module delivers 64GB of error-correcting capacity for virtualisation hosts, database nodes or high-thread-count compute tasks. Headroom ends when the platform reaches its maximum DIMM count or total memory limit, at which point additional modules or higher-density parts would be required.
Puntos fuertes
- 64GB capacity doubles server memory headroom
- DDR4 3200 CL22 delivers 25600 MB/s peak bandwidth
- ECC registered design corrects errors for uptime
- 2V operation cuts power draw per module
- Backward compatible with 2133, 2400, 2666, 2933 MHz systems
Especificaciones
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
Preguntas sobre este artículo
Does my motherboard need 288-pin DDR4 ECC RDIMM slots to install this 64GB module?
Yes, the module is a 288-pin DDR4 ECC Registered DIMM and requires a motherboard with matching RDIMM slots that support ECC memory.
Can I run this 3200MHz module alongside my existing 2666MHz DDR4 ECC registered DIMMs?
Yes, the module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds and will operate at the lowest common speed.
How do I confirm the module is running at PC4-25600 3200MHz CL22 after installation?
Check the BIOS memory information or use a system utility like CPU-Z to verify the reported speed, CAS latency of 22 and ECC registered status.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
57.634,99 US$
0.71659464BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
53.038,99 US$
0.65945107BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
70.395,99 US$
0.87525631BTC
En stock