OWC 4GB DDR2 800 PC2-6400 CL6 2Rx8 200-pin 1.8V SODIMM laptop RAM
- 4GB
- 200-Pin DDR2 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
Dual-channel 8 GB DDR2-800 SODIMM kit (2 × 4 GB) with CL6 latency at 1.8 V for laptops and all-in-one systems
Capacity 8GB (2 x 4GB)
This OWC kit supplies 8 GB of DDR2 memory as two matched 4 GB modules running at 800 MHz with CL6 latency. The 200-pin SO-DIMM form factor fits compatible laptops, all-in-one desktops and select NAS units. Unbuffered, non-ECC operation at 1.8 V follows standard JEDEC specifications for a warranty-safe upgrade.
Each module operates at the standard 1.8 V without a heat spreader, drawing minimal power and producing no audible noise. Passive cooling relies on the host system's airflow, keeping thermals within normal DDR2 limits during typical multitasking workloads.
The dual-channel pair is pre-matched at the factory to simplify installation and avoid capacity or timing mismatches. JEDEC and ROHS compliance ensures the modules meet OEM specifications, while OWC's in-house testing and advanced replacement programme support a straightforward DIY upgrade without additional configuration steps.
| Brand | OWC |
|---|---|
| Part Number | 6S4D22R8008P |
| Capacity | 8GB (2 x 4GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each module with the slot key, press firmly at both ends until the side clips snap shut, then replace the door and battery before powering on.
No routine maintenance is required; the modules are solid-state with no moving parts. Replace only if a memory test reports errors or the system becomes unstable after years of service.
The DDR2 800 bus bandwidth and CL6 latency ceiling cap throughput before thermal or voltage limits are reached, since the modules run at standard 1.8V without heat spreaders.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?