Phanteks PH-F140D30_DRGB_PWM_BK01 140mm 30mm DRGB PWM case fan
- 1 Fan
- Case Fan
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Phanteks
Three 140 mm hydraulic-bearing fans deliver up to 104.62 CFM at 1800 RPM with PWM control from 500 RPM and daisy-chain cabling
Fan Size 140mm
Style Regular / No DRGB
Model M25
Option Triple Fans
Las versiones tachadas existen, pero no están disponibles aquí.
This pack contains three 140 mm case fans, each 25 mm thick, designed to work well with fine mesh filters, heatsinks and radiators. The hydraulic bearing supports a 500–1800 RPM range with PWM control. All three fans are black and have no DRGB lighting. A daisy-chain cable lets you connect them to a single PWM header.
At the top speed of 1800 RPM each fan moves 104.62 CFM while producing 36.57 dB(A). The wide RPM range gives headroom for demanding loads, yet the low-speed start at 500 RPM keeps noise down during light work. Performance drops off below the minimum RPM, so very quiet targets may need a different curve.
The 4-pin PWM connector allows motherboard speed control from 500 to 1800 RPM. Daisy-chaining the three fans runs them from one header, but the header’s current rating becomes the practical limit. No DRGB or addressable lighting is present, so RGB ecosystems cannot sync these fans.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Fan, Black |
| Part Number | PH-F140M25_PWM_BBK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Peso de envío | 0.68 kg |
| Dimensiones del paquete | 203 × 140 × 89 mm |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Yes, each fan uses the standard 140mm square frame and 25mm thickness, so they drop into any case or radiator designed for 140mm fans.
In BIOS or fan-control software, set a target RPM and watch the reported speed settle between 500 and 1800 RPM with the ±10% tolerance.
The pack supplies three fans and daisy-chain cables to link them together, requiring only a single 4-pin PWM header on the board.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?