PUSKILL
PUSKILL 2.5" SATA Internal SSD 1TB
A 2.5-inch SATA solid-state drive with 1 TB capacity for desktops, laptops and mini PCs
- Device TypeInternal Solid State Drive (SSD)
- Capacity1TB
- 1TB capacity for large file storage
- SATA 6.0Gb/s interface enables up to 600MB/s transfer speed
- Backwards compatible with SATA 3.0Gb/s and SATA 1.5Gb/s ports
- 5" form factor fits desktops, laptops, mini PCs and all-in-one systems
- Requires initialisation before first use
2.5" SATA SSD 1TB
This PUSKILL 2.5" SATA internal SSD provides 1TB of solid-state storage for desktops, laptops, mini PCs and all-in-one systems. It uses the standard SATA interface to replace a mechanical hard drive without changing cabling or drivers.
Installation and initialisation
The drive fits any standard 2.5" bay and connects with a regular SATA data and power cable. After fitting the hardware, the SSD must be initialised in the operating system before it becomes usable; otherwise it will not appear as a storage volume.
SATA 6.0Gb/s interface speed
The drive operates at the SATA 6.0Gb/s specification with a maximum sequential throughput of 600MB/s, and is backward compatible with SATA 3.0Gb/s and SATA 1.5Gb/s ports. Actual transfer rates depend on the host controller, cable quality and system configuration.
Puntos fuertes
- 1TB capacity for large file storage
- SATA 6.0Gb/s interface enables up to 600MB/s transfer speed
- Backwards compatible with SATA 3.0Gb/s and SATA 1.5Gb/s ports
- 5" form factor fits desktops, laptops, mini PCs and all-in-one systems
- Requires initialisation before first use
Especificaciones
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Capacity | 1TB |
Otras versiones de este modelo
5 más en esta gama
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Preguntas sobre este artículo
How do I verify the 1TB SATA drive is working after installation?
Initialise the drive in your operating system, then check that the reported capacity is close to the expected 0.93 factor of the labelled 1TB size and run a basic read/write test to confirm the SATA interface is active.
What comes in the box with the 2.5 inch SATA SSD and what must I buy separately?
The package contains the 2.5 inch SATA solid state drive only; a SATA data cable, a SATA power connector and a 2.5 inch drive bay or bracket for desktop installation are not included and must be sourced separately.
Which SATA version should I choose for this 1TB drive?
The drive uses the SATA 6.0 Gb/s interface with a maximum throughput of 600 MB/s and is backward compatible with SATA 3.0 Gb/s (300 MB/s) and SATA 1.5 Gb/s (150 MB/s) ports, so select the version that matches your system’s SATA generation.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
