NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
SAMSUNG
32 GB DDR4 ECC registered server memory at 2666 MT/s with CL17 timing and 1.20 V operation
This 32GB DDR4 2666 module targets servers and workstations that require error-correcting registered memory. It delivers 32GB capacity at 2666 MT/s with CL17 latency and 1.20V operation. The 2Rx4 organisation suits multi-channel configurations in compatible platforms. Buyers needing non-ECC or unbuffered DIMMs should choose a different product.
The module runs at the standard DDR4 voltage of 1.20V without a heat spreader, relying on chassis airflow for cooling. Registered operation adds a clock cycle of buffering, which marginally increases power draw compared with unbuffered equivalents. No active cooling is present, so acoustic output depends entirely on system fans. Builds with restricted airflow must verify thermal headroom independently.
The 288-pin DDR4 form factor fits any slot wired for DDR4 registered memory, but the motherboard and CPU must explicitly support ECC and registered DIMMs. The 2Rx4 rank structure counts as two logical ranks per channel, which may limit maximum populated slots on some platforms. Systems requiring consumer SO-DIMMs or non-ECC UDIMMs cannot use this module.
| Brand | SAMSUNG |
|---|---|
| Model | M393A4K40BB2-CTD |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Peso de envío | 0.07 kg |
| Dimensiones del paquete | 165 × 51 × 13 mm |
Align the off-centre notch on the 288-pin edge connector with the motherboard slot key; press straight down until both side clips click — forcing it backwards bends pins.
No scheduled maintenance; ECC corrects single-bit errors on the fly, but if multi-bit errors appear in system logs the DIMM should be replaced.
The 1.20 V operating voltage and lack of a heat spreader mean thermal throttling can occur before bandwidth saturates.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?