BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277984BTC
En stock
SK hynix
SK hynix HMT125U6DFR8C-H9 4GB (2x2GB) DDR3-1333 CL9 1.50V desktop RAM
A 4 GB DDR3 kit of two 2 GB DIMMs running at 1333 MHz with CL9 latency and 1.50 V operation
- Capacity4GB (2 x 2GB)
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- 4 GB total capacity from two 2 GB modules
- DDR3-1333 speed rated at PC3-10600
- CL9 latency for responsive desktop performance
- 50 V standard voltage for broad compatibility
- 240-pin unbuffered DIMM form factor for desktop motherboards
What this kit is
This kit supplies two 2 GB unbuffered DIMMs for a total of 4 GB of DDR3 desktop memory. It is intended for older systems that still accept 240-pin modules running at the standard 1.50 V level.
The specification that decides fit
The modules run at DDR3-1333 with a CAS latency of CL9 and conform to the PC3-10600 rating. If the motherboard requires a different speed, voltage or pin count these sticks will not work.
Installation and common issues
The 240-pin DIMMs slot into standard desktop memory sockets with a single keyed notch. The usual problem is mixing these non-ECC sticks with registered or ECC modules, which prevents the system from posting.
Puntos fuertes
- 4 GB total capacity from two 2 GB modules
- DDR3-1333 speed rated at PC3-10600
- CL9 latency for responsive desktop performance
- 50 V standard voltage for broad compatibility
- 240-pin unbuffered DIMM form factor for desktop motherboards
Especificaciones
| Brand | HYNIX |
|---|---|
| Series | Desktop Memory |
| Model | HMT125U6DFR8C-H9 |
| Capacity | 4GB (2 x 2GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Preguntas sobre este artículo
What does the DDR3-1333 speed rating mean once the modules are installed?
The memory runs at 1333 MT/s, delivering a peak bandwidth of 10600 MB/s per module when the system is configured for that speed.
How does the PC3-10600 interface limit real-world throughput?
PC3-10600 caps the theoretical maximum transfer rate at 10600 MB/s; actual throughput will be lower due to latency and controller overhead.
Will these 240-pin DIMMs fit a standard desktop motherboard slot?
Yes, each module uses the 240-pin DDR3 DIMM form factor that matches the standard desktop memory slot.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
