SunnyStar Co., Ltd
SunnyStar Co., Ltd FD124010EB 40mm 12V 0.12A 3-Pin Case Fan
Compact 40 mm case fan with 12 V, 0.12 A ball-bearing motor and 3-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 40 mm frame fits tight case spaces
- Ball bearing ensures long operational life
- 12 V 0.12 A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits stealth builds
Compact 40 mm Case Fan
The SunnyStar FD124010EB is a 40 mm square case fan designed for tight chassis spaces. It runs on 12 V and draws 0.12 A through a standard three-pin power connector. Ball bearings provide durable operation for continuous cooling duty.
Builders with Restricted Clearance
This fan suits small-form-factor cases, rackmount units or GPU heatsinks that only accept a 40 mm frame. Builders who need higher airflow, PWM speed control or addressable lighting should look at larger or four-pin alternatives.
40*40*10 mm Physical Footprint
The 40*40*10 mm outline is the single specification that determines whether the fan fits your mounting holes and clearance envelope. Verify those exact dimensions against your chassis or heatsink before purchase.
Puntos fuertes
- Compact 40 mm frame fits tight case spaces
- Ball bearing ensures long operational life
- 12 V 0.12 A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits stealth builds
Especificaciones
| Series | FD124010EB |
|---|---|
| Model | FD124010EB |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 40*40*10mm |
Preguntas sobre este artículo
Will the 40 mm square frame fit my case fan mount?
The fan measures 40 by 40 by 10 mm, so it matches standard 4010 mounting holes.
How do I connect the 3-pin header without reversing polarity?
Align the keyed 3-pin connector with the motherboard header tab; the yellow wire is the tachometer signal.
When should I replace the ball-bearing fan?
Replace it if the bearing noise rises or the rotor stops spinning at 12 V 0.12 A.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.0000105BTC
En stock