SunnyStar Co., Ltd
SunnyStar Co., Ltd PL60B24M 24V .08A 6015 60x60x15mm case fan
A 60 mm square case fan with ball bearing, 24 V .08 A power and 15 mm depth
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- 24 V .08 A rating suits low-voltage systems
- Ball bearing design reduces friction for longer life
- 60 × 60 × 15 mm frame fits tight 6 cm mounts
- Two-pin DC power connector enables simple installation
- Non-LED black housing keeps builds clean and distraction-free
SunnyStar PL60B24M 6015 case fan
The SunnyStar PL60B24M is a 60 mm square case fan built for equipment that runs on a 24 V supply. Its two-pin power connector and ball-bearing motor suit industrial PCs, inverter coolers and compact chassis where a low-profile 15 mm frame is required.
Sustained-load behaviour
Ball-bearing construction keeps friction stable over long operating periods, so airflow remains consistent when the fan runs continuously in an inverter or server enclosure. The 0.08 A draw at 24 V delivers steady cooling without the current spikes that can stress small power circuits.
2-pin DC power limits
A two-pin DC connection provides only fixed-voltage operation; speed cannot be modulated by PWM or motherboard headers. Builders who need variable fan curves or tachometer feedback must add an external controller or choose a different connector type.
Puntos fuertes
- 24 V .08 A rating suits low-voltage systems
- Ball bearing design reduces friction for longer life
- 60 × 60 × 15 mm frame fits tight 6 cm mounts
- Two-pin DC power connector enables simple installation
- Non-LED black housing keeps builds clean and distraction-free
Especificaciones
| Series | PL60B24M |
|---|---|
| Model | PL60B24M |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*15mm |
Preguntas sobre este artículo
How much heat does the 24V .08A motor add to a case running 24/7?
The fan draws 0.08 A at 24 V, so its continuous power draw is low and most energy becomes airflow rather than retained heat.
What connector must my chassis or controller provide for the 2-pin power lead?
A standard 2-pin header is required; the fan uses a simple 2-wire DC connection with no PWM or speed-signal wire.
Will the 60 mm square frame and 15 mm depth fit the mounting holes on my legacy 6015-sized inverter cooler?
Yes, the 60×60×15 mm dimensions match the classic 6015 footprint, so existing screw holes line up directly.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001038BTC
En stock