BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278972BTC
En stock
Supermicro
Supermicro MBD-X11SPI-TF-O server motherboard LGA 3647 8 DDR4 slots 1TB max
Server motherboard for single Intel Xeon Scalable processors with eight DDR4 ECC slots supporting up to 1 TB, ten SATA 6 Gbps ports, dual 10 GbE LAN, and five PCIe 3.0 expansion slots
- CPU Socket TypeLGA 3647
- CPU TypeSupports 2nd Gen Intel Xeon Scalable Processors and Intel Xe
- North BridgeIntel C622
- Number of DDR4 Slots8 x 288-pin
- DDR4 StandardDDR4 2666 / 2400 / 2133 / 1866 / 1600 MHz ECC
- Maximum Memory SupportedUp to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 256GB
- Supports up to 28-core Xeon Scalable processors
- 8 DDR4 slots enable 1TB ECC 3DS LRDIMM capacity
- Dual 10GbE Intel X722 and X557 controllers
- 10 SATA 6Gb/s ports with RAID 0/1/5/10
- M.2 PCIe 3.0 x4 plus SATA interface
Single-socket Xeon platform
The Supermicro MBD-X11SPI-TF-O is an ATX server motherboard built around the LGA 3647 socket for single-socket Intel Xeon Scalable processors. It targets builders who need high core counts and large memory capacity in a standard chassis. The Intel C622 chipset provides 10 SATA 6.0 Gb/s ports with RAID 0/1/5/10 support.
Installation notes
The board fits standard ATX mounting holes and uses common 24-pin and 8-pin EPS power connectors. Eight 288-pin DDR4 slots accept ECC RDIMM, LRDIMM or 3DS LRDIMM modules; population rules depend on the specific CPU installed. One PCIe 3.0 x16 slot runs at x16 or x8, a second x16 slot runs at x8, plus one x8 and one x4 slot share bandwidth. The M.2 socket supports both PCIe 3.0 x4 and SATA drives in 2280 or 22110 form factors. Dual 10 GbE RJ45 ports and the Aspeed AST2500 BMC with dedicated LAN simplify remote management.
Pre-purchase checks
Verify that your chosen Xeon Scalable processor is on the vendor's qualified CPU list for this revision. Confirm the memory kit matches the supported DDR4 speeds of 2666, 2400, 2133, 1866 or 1600 MHz and the ECC type required for your capacity target. Ensure the chassis can route power to the EPS connectors and provides airflow over the chipset heatsink. Builders who need more than one CPU socket or more than 10 SATA ports should consider a dual-socket platform.
Puntos fuertes
- Supports up to 28-core Xeon Scalable processors
- 8 DDR4 slots enable 1TB ECC 3DS LRDIMM capacity
- Dual 10GbE Intel X722 and X557 controllers
- 10 SATA 6Gb/s ports with RAID 0/1/5/10
- M.2 PCIe 3.0 x4 plus SATA interface
Especificaciones
| Brand | SUPERMICRO |
|---|---|
| Model | MBD-X11SPI-TF-O |
| CPU Socket Type | LGA 3647 |
| CPU Type | Supports 2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors |
| North Bridge | Intel C622 |
| Number of DDR4 Slots | 8 x 288-pin |
| DDR4 Standard | DDR4 2666 / 2400 / 2133 / 1866 / 1600 MHz ECC |
| Maximum Memory Supported | Up to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 256GB ECC RDIMM |
| ECC Supported | Yes |
| PCI Express 3.0 x16 | 1 x PCI-E 3.0 x16 1 x PCI-E 3.0 x16 (x16 or x8 ) |
| PCI Express x8 | 1 x PCI-E 3.0 x8 (x0 or x8 ) 1 x PCI-E 3.0 x8 |
| PCI Express x4 | 1 x PCI-E 3.0 x4 (in x8 slot) |
| Other Slots | M.2 Interface: PCI-E 3.0 x4 and SATA Form Factor: 2280, 22110 |
| SATA | 10 x SATA 6.0Gb/s |
| SATA RAID | 0/1/5/10 |
| Onboard Video Chipset | Aspeed AST2500 BMC |
| LAN Chipset | Intel X722 |
| LAN Speed | 10Gbps |
| Second LAN Chipset | Intel X557 |
| Second LAN Speed | 10Gbps |
| Max LAN Speed | 2 x 10Gbps |
| COM | 1 |
| Video Ports | 1 x VGA |
| USB 1.1/2.0 | 2 x USB 2.0 |
| USB 3.0 | 2 x USB 3.0 |
| Features | Intel Xeon Scalable Processors, Single Socket P (LGA 3647) supported, CPU TDP support 205W Intel C622 chipset Up to 1TB ECC 3DS LRDIMM, up to DDR4-2666 MHz; 8 x DIMM slots Expansion slots: 1 x PCI-E 3.0 x16, 1 x PCI-E 3.0 x16 (x16 // x8), 1 x PCI-E 3.0 x8 (x0 // x8), 1 x PCI-E 3.0 x8, 1 x PCI-E 3.0 x4 (in x8) 2 x 10 GbE LAN ports 10 x SATA3 (6 Gbps) via C622 I/O: 1 x VGA, 2 x COM, TPM header 2 x SuperDOM with built-in power 5 x USB 3.0 (2 x rear, 1 x Type-A, 2 x via header), 6 x USB 2.0 (2 x rear, 4 x via headers) M.2 NGFF connector M.2 Interface: PCI-E 3.0 x4 and SATA Form Factor: 2 |
| Form Factor | ATX |
| Dimensions (W x L) | 12.0" x 9.6" |
| Peso de envío | 1.30 kg |
| Dimensiones del paquete | 335 × 264 × 71 mm |
Preguntas sobre este artículo
How can I verify the motherboard is operating correctly after installation?
Check that the Aspeed AST2500 BMC initializes and provides IPMI 2.0 access, then confirm the Intel X722 and X557 controllers each show a 10Gbps link on both RJ45 ports.
What is included with the board and what must be sourced separately?
The board provides 8 DDR4 DIMM slots, 10 SATA 6.0Gb/s ports, one PCI-E 3.0 x16, two PCI-E 3.0 x8, one PCI-E 3.0 x4, an M.2 slot for 2280 or 22110 drives, and dual 10Gbps LAN; CPU, memory modules, storage drives and add-in cards are not included.
Which memory capacity tier should I choose for this motherboard?
For up to 1TB use ECC 3DS LRDIMM, for up to 512GB use ECC LRDIMM, and for up to 256GB use ECC RDIMM; all modules must be DDR4 2666, 2400, 2133, 1866 or 1600 MHz.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00281568BTC
En stock
