Thermaltake
Thermaltake TOUGHRAM XG RGB DDR4 4400MHz 16GB (2x8GB) CL19 1.45V Black desktop RAM
- 16GB (2 x 8GB)
- DDR4 4400 (PC4 3520…
152,99 US$
0.00198153BTC
En stock
Thermaltake
Thermaltake TOUGHRAM XG RGB DDR4 4600MHz 16GB (8GB x 2) desktop RAM
Dual-channel DDR4 kit running at 4600MHz with CL19 timing, screened ICs on a 10-layer PCB and 16 addressable RGB LEDs across 8 lighting zones
- Capacity16GB (2 x 8GB)
- SpeedDDR4 4600 (PC4 36800)
- CAS LatencyCL19
- Timing19-26-26-45
- Voltage1.50V
- Multi-channel KitDual Channel Kit
Speed DDR4 4600 (PC4 36800)
- DDR4 4600 (PC4 36800)
- DDR4 4400 (PC4 35200)
- DDR4 4600 speed with CL19 timing for responsive gaming performance
- 16GB dual-channel kit enables smooth multitasking on Intel Z590 and AMD X570 platforms
- 10-layer PCB with 2oz copper inner layer delivers stable overclocking headroom
- 16 addressable RGB LEDs across 8 zones create dynamic X-shaped lighting effects
- Aluminium heat spreader with 10µ gold fingers ensures reliable heat dissipation and durability
Thermaltake TOUGHRAM XG RGB DDR4 4600MHz Kit
This Thermaltake TOUGHRAM XG RGB kit provides 16GB of desktop DDR4 memory across two 8GB modules. It is aimed at enthusiasts building high-performance Intel or AMD systems who also want addressable RGB lighting.
Speed and Latency Decide Compatibility
The modules run at DDR4 4600 with a CAS latency of CL19 and timings of 19-26-26-45 at 1.50V, using Intel XMP 2.0 profiles for automatic configuration. These figures determine whether your motherboard and CPU memory controller can support the rated frequency.
Suited for Z590, Z490, X570 and B550 Builds
The kit is recommended for Intel Z590, Z490 and AMD X570, B550 platforms where the memory controller can handle 4600MT/s. Builders on older chipsets or locked motherboards that cannot run XMP profiles should consider lower-speed memory instead.
Puntos fuertes
- DDR4 4600 speed with CL19 timing for responsive gaming performance
- 16GB dual-channel kit enables smooth multitasking on Intel Z590 and AMD X570 platforms
- 10-layer PCB with 2oz copper inner layer delivers stable overclocking headroom
- 16 addressable RGB LEDs across 8 zones create dynamic X-shaped lighting effects
- Aluminium heat spreader with 10µ gold fingers ensures reliable heat dissipation and durability
Especificaciones
| Brand | Thermaltake |
|---|---|
| Series | TOUGHRAM XG RGB |
| Model | R016D408GX2-4600C19A |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 4600 (PC4 36800) |
| CAS Latency | CL19 |
| Timing | 19-26-26-45 |
| Voltage | 1.50V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Recommend Use | Intel Z590, Z490, AMD X570, B550 |
| LED Color | RGB |
Otras versiones de este modelo
1 más en esta gama
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Preguntas sobre este artículo
Will this kit run at 4600MHz on my Intel Z590 board without manual tuning?
Yes. The modules carry an Intel XMP 2.0 profile rated for DDR4 4600 at CL19-26-26-45 and 1.50V; enable XMP in the BIOS to apply those settings automatically.
Is the RGB lighting compatible with motherboard sync software from major vendors?
The 16 addressable LEDs are controlled through Thermaltake TOUGHRAM software and NeonMaker, which can synchronise with compatible motherboard RGB ecosystems for unified effects.
What clearance does the aluminum heat spreader need under a large air cooler?
The heat spreader uses a low-profile aluminum design; measure from the motherboard surface to the cooler base and ensure at least a few millimetres of gap for the module height.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278456BTC
En stock
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00281046BTC
En stock
