Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green DDR3 laptop memory modules with black chips and gold contacts

Timetec

Timetec Hynix IC 16GB (2x8GB) DDR3 1066MHz CL7 1.5V laptop RAM

SKU CH-QSQT-MXQE7

A 16 GB DDR3 SO-DIMM kit running at 1066 MHz with CL7 latency and 1.5 V for select 2009-2010 Apple laptops and desktops

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB kit boosts multitasking on supported Macs
  • DDR3 1066 MHz CL7 matches original Apple spec
  • 5 V unbuffered modules install without voltage changes
  • 204-pin SO-DIMM fits 13" MacBook Pro Mid 2010 and iMac 27" Late 2009
  • Hynix ICs selected for stability in extreme environments

Apple-compatible DDR3 SO-DIMM kit

This Timetec kit supplies 16 GB of DDR3 laptop memory as two 8 GB modules. Each stick is a 204-pin SO-DIMM rated at 1066 MHz (PC3-8500) with CL7 latency and 1.5 V operation. The modules use Hynix ICs and are built for Apple systems that accept unbuffered, non-ECC DDR3 memory.

Suits MacBook, MacBook Pro.

Owners of the listed Apple computers can install this kit to reach 16 GB total capacity. The dual-rank 2Rx8 design matches the original specification for those machines. Builders working on non-Apple laptops or on Apple models outside the 2009–2010 range should verify DDR3 SO-DIMM support before purchasing.

1066 MHz CL7 at 1.5 V

The decisive specification is the 1066 MHz speed with CL7 timing at 1.5 V. Systems that require a different DDR3 speed grade, a lower voltage or a higher CAS latency will not run this memory at its rated settings. Match these three values to the host machine’s requirements to ensure compatibility.

Puntos fuertes

  • 16 GB kit boosts multitasking on supported Macs
  • DDR3 1066 MHz CL7 matches original Apple spec
  • 5 V unbuffered modules install without voltage changes
  • 204-pin SO-DIMM fits 13" MacBook Pro Mid 2010 and iMac 27" Late 2009
  • Hynix ICs selected for stability in extreme environments

Especificaciones

BrandTimetec
ModelMR-H8GD310J7C
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseApple System

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How do I install the 204-pin DDR3 SO-DIMM modules in my MacBook Pro 13'' Mid 2010, and what step is often missed?

Remove the bottom case, eject the old modules by spreading the side clips, insert each 8GB stick at an angle until the gold contacts are nearly hidden, then press down firmly until both clips click — the step most people miss is pressing hard enough to engage both clips.

What maintenance or replacement will the 16GB kit need over its lifetime?

No scheduled maintenance is required; the unbuffered non-ECC modules have no batteries or moving parts, so replacement only occurs if a module fails or you upgrade to a system that needs faster memory.

What limit appears first when the CL7 1066MHz memory runs under sustained heavy load?

The DDR3 1066MHz bandwidth ceiling is reached before latency or voltage becomes a bottleneck, capping sustained throughput at the PC3-8500 rate.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.