Vetroo
Vetroo 850W SFX power supply ATX 3.1 PCIe 5.1 80 Plus Gold Black
SFX unit delivers 850 W with ATX 3.1 and PCIe 5.1 support, 80 Plus Gold efficiency, full modular cabling and a 90 mm FDB fan
- ColorBlack
- TypeSFX
- Maximum Power850W
- Fans90mm
- Main Connector20+4Pin
- PCI-Express Connector1 x (12+4) Pin, 2 x (6+2)
- 850W output powers demanding builds
- ATX 3.1 and PCIe 5.1 ready for latest GPUs
- 80 Plus Gold efficiency cuts waste heat
- Fully modular cables keep the interior tidy
- SFX-to-ATX bracket fits both small and standard cases
SFX 850W ATX 3.1 unit
This Vetroo power supply delivers 850 watts in the compact SFX form factor and meets the ATX 3.1 and PCIe 5.1 specifications. A 90 mm fluid-dynamic-bearing fan handles cooling while keeping noise low. The package includes an SFX-to-ATX bracket so the unit fits both mini-ITX and standard ATX cases. Full modular cabling lets you install only the leads your build requires.
Small-form-factor builders and GPU upgraders
The SFX footprint and included bracket suit compact cases and allow easy migration to a larger chassis later. One 12VHPWR connector plus two 6+2-pin PCIe plugs support current and previous-generation graphics cards. Builds that need more than three SATA power connectors or that require additional PCIe cables for multi-GPU arrays should consider a unit with higher connector counts.
Single 12VHPWR connector
The specification that decides fitment is the presence of exactly one 12+4-pin PCIe 5.1 connector. If your graphics card draws power through two such connectors, or if your motherboard requires dual EPS cables, this model will not meet the requirement without adapters that add bulk and failure points.
Puntos fuertes
- 850W output powers demanding builds
- ATX 3.1 and PCIe 5.1 ready for latest GPUs
- 80 Plus Gold efficiency cuts waste heat
- Fully modular cables keep the interior tidy
- SFX-to-ATX bracket fits both small and standard cases
Especificaciones
| Brand | Vetroo |
|---|---|
| Color | Black |
| Type | SFX |
| Maximum Power | 850W |
| Fans | 90mm |
| Main Connector | 20+4Pin |
| PCI-Express Connector | 1 x (12+4) Pin, 2 x (6+2) |
| SATA Power Connector | 3 |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Over Voltage Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50-60 Hz |
| Input Current | 12A @ 115V, 6A @ 230V |
| Dimensions | 4.9 x 3.9 x 2.5" |
| Weight | 3.14 Pound |
| Frequency Range | 50-60 Hz |
| Fans Total Quantity | 1 |
Otras versiones de este modelo
5 más en esta gama
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Preguntas sobre este artículo
What does the ATX 3.1 standard cap the 12VHPWR connector at in practice?
The unit includes one 12+4 pin connector built to the ATX 3.1 specification and PCIe 5.1, delivering up to 850 W total across all rails
What does it physically need to fit or mount in a standard ATX case?
An SFX-to-ATX bracket is included so the 4.9 x 3.9 x 2.5 inch SFX body can be secured in a regular ATX power-supply opening
How is it installed, and which step do builders often get wrong?
Mount the PSU with the bracket, connect only the fully modular cables your build needs, and remember to seat the 12+4 pin GPU cable firmly until it clicks
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM








