Western Digital
Western Digital WD102KRYZ Gold 10TB 7200 RPM 256MB SATA 3.5" internal hard drive
10 TB enterprise SATA drive with 7200 RPM, 256 MB cache and 2.5 M-hour MTBF for data-centre workloads
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity10TB
- RPM7200 RPM
- Cache256MB
- FeaturesConquer tough workloads with enterprise-grade WD Gold HDDs.
- 10TB capacity for massive enterprise storage
- 7200 RPM speed for fast data access
- 256MB cache improves transfer performance
- Up to 2.5M hours MTBF enhances reliability
- Vibration protection technology maintains consistent operation
Enterprise Storage Drive
The Western Digital WD Gold WD102KRYZ is a 10TB 3.5 inch internal hard drive built for enterprise storage systems. It spins at 7200 RPM with a 256MB cache and connects via a SATA 6.0Gb/s interface. The bare drive uses vibration protection technology to maintain performance in multi-drive environments.
Suited for High-Capacity Arrays
This drive suits administrators deploying high-capacity arrays in enterprise-class storage systems and data centers. The 2.5M hour MTBF rating supports workloads that demand sustained reliability. Buyers needing portable storage or drives for standard desktop workloads should consider other form factors and series.
Check SATA Infrastructure
Verify that your host system or enclosure provides a SATA 6.0Gb/s port and adequate 3.5 inch drive bays with 26.10mm height clearance. Confirm the power supply delivers sufficient current for 7200 RPM operation. Ensure your RAID controller or operating system supports 10TB volumes before installation.
Puntos fuertes
- 10TB capacity for massive enterprise storage
- 7200 RPM speed for fast data access
- 256MB cache improves transfer performance
- Up to 2.5M hours MTBF enhances reliability
- Vibration protection technology maintains consistent operation
Especificaciones
| Brand | WD |
|---|---|
| Series | Gold |
| Model | WD102KRYZ |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 10TB |
| RPM | 7200 RPM |
| Cache | 256MB |
| Features | Conquer tough workloads with enterprise-grade WD Gold HDDs. Available in 1TB to 14TB capacities Enhanced reliability with up to 2.5M hours MTBF Specifically designed for use in enterprise-grade data centers and storage systems Improve performance with our vibration protection technology HelioSeal technology delivers high capacities with a low power draw [12TB and above] |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| Peso de envío | 0.88 kg |
| Dimensiones del paquete | 229 × 155 × 76 mm |
Preguntas sobre este artículo
Will this 3.5" SATA 6.0Gb/s drive fit and power on in my standard ATX desktop case with a spare SATA power connector?
Yes, the drive uses the standard 3.5" form factor measuring 147.00mm long, 101.60mm wide and 26.10mm high, and connects via a regular SATA data cable and SATA power connector.
Can I run this 7200 RPM enterprise drive on an older motherboard that only supports SATA 3Gb/s?
The SATA 6.0Gb/s interface is backward compatible, so the drive will work at the slower 3Gb/s speed on that motherboard without any configuration changes.
How do I confirm the drive is healthy and performing at 7200 RPM after installation?
Check the SMART data in your OS or BIOS for the model WD102KRYZ, verify the reported capacity is 10TB and the rotational speed shows 7200 RPM, then run a short surface scan to confirm zero reallocated sectors.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
