Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Silver 3.5 inch bare hard drive with exposed circuit board and SATA connectors

Western Digital

Western Digital WD8005FFBX 8TB 7200 RPM 256MB Cache SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-038B-KHB8X MPN WD8005FFBX

8 TB 7200 RPM CMR drive with 256 MB cache for 24-bay enterprise NAS systems

  • InterfaceSATA 6.0Gb/s
  • Capacity8TB
  • Recording TechnologyCMR
  • RPM7200 RPM
  • Cache256MB
  • UsageEnterprise NAS Hard Drives

Capacity 8TB

Ver 4 configuraciones más
  • Engineered for 24×7 multi-user NAS environments with enterprise-class reliability
  • Handles intensive workloads up to 300TB per year workload rate
  • NASware 3.0 technology optimises drive parameters for RAID-optimised NAS systems
  • Rotation vibration sensors counteract disturbances in multi-bay enclosures
  • CMR recording with 256MB cache at 7200 RPM delivers sustained performance

Purpose-built for multi-bay NAS

The WD Red Pro WD8005FFBX is an 8TB 3.5-inch internal hard drive built for 24×7 operation in commercial and enterprise NAS enclosures. It uses CMR recording technology, spins at 7200 RPM and provides a 256MB cache over a SATA 6.0Gb/s interface.

Suited for RAID arrays, not for desktop boot drives

This drive targets businesses that need sustained throughput and vibration tolerance in systems with up to 24 bays and a 300TB annual workload rating. It is not designed for single-drive desktop workloads, laptop upgrades or external enclosures that lack enterprise-grade vibration damping.

The deciding spec is the 300TB yearly workload

That figure defines the drive class: if your NAS workload stays within this limit the drive is warranted for the environment; if your write volume will exceed it you need a higher-rated enterprise model.

Puntos fuertes

  • Engineered for 24×7 multi-user NAS environments with enterprise-class reliability
  • Handles intensive workloads up to 300TB per year workload rate
  • NASware 3.0 technology optimises drive parameters for RAID-optimised NAS systems
  • Rotation vibration sensors counteract disturbances in multi-bay enclosures
  • CMR recording with 256MB cache at 7200 RPM delivers sustained performance

Especificaciones

BrandWD
SeriesRed Pro
ModelWD8005FFBX
InterfaceSATA 6.0Gb/s
Capacity8TB
Recording TechnologyCMR
RPM7200 RPM
Cache256MB
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
Peso de envío0.82 kg
Dimensiones del paquete191 × 127 × 64 mm

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does my NAS need a SATA 6.0Gb/s port and a 3.5" drive bay to use the WD Red Pro 8TB?

Yes, the drive connects via SATA 6.0Gb/s and fits a standard 3.5" bay measuring up to 147.00mm long, 101.60mm wide and 26.10mm high.

Will the 7200 RPM Red Pro 8TB run reliably in a 24-bay NAS alongside slower drives?

The drive is tested for up to 24-bay enclosures, includes RV sensors to counter vibration and uses NASware 3.0 to match multi-drive workloads.

How can I verify the WD8005FFBX is healthy after installation?

Check SMART data for reallocated sectors and confirm the drive reports 8TB capacity, 7200 RPM and 256MB cache in the NAS dashboard.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.