XPG
XPG GAMMIX S50 Lite 1TB internal SSD with heatsink
PCIe Gen4 x4 M.2 2280 SSD with 1TB 3D TLC, up to 3900/3200 MB/s sequential and 380,000/540,000 IOPS random, plus aluminium heatsink
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 4.0 x4
- Up to 3900 MB/s sequential read via PCIe 4.0 x4
- Up to 3200 MB/s sequential write for fast file transfers
- 740 TBW endurance rating backed by 3D NAND flash
- Aluminium heatsink keeps temperatures low under sustained loads
- AES 256-bit encryption protects data at rest
GAMMIX S50 Lite 1TB SSD
The XPG GAMMIX S50 Lite is a 1TB internal solid state drive built for consumers who need fast storage. It uses a PCIe 4.0 x4 interface and the M.2 2280 form factor. The drive targets gamers, overclockers and PC enthusiasts seeking high throughput.
Aluminium heatsink and M.2 2280 mount
A robust aluminium heatsink is included to dissipate heat during sustained workloads. The M.2 2280 form factor fits standard motherboard slots and the drive is backward compatible with PCIe 3.0 platforms. Power draw is 0.14W idle and 0.33W active.
PCIe 4.0 x4 sequential speed
Sequential reads reach 3900 MBps and writes reach 3200 MBps on this PCIe 4.0 x4 drive. Random performance hits 380,000 IOPS read and 540,000 IOPS write with SLC caching and DRAM cache buffer. Endurance is rated at 740TB written.
Puntos fuertes
- Up to 3900 MB/s sequential read via PCIe 4.0 x4
- Up to 3200 MB/s sequential write for fast file transfers
- 740 TBW endurance rating backed by 3D NAND flash
- Aluminium heatsink keeps temperatures low under sustained loads
- AES 256-bit encryption protects data at rest
Especificaciones
| Brand | XPG |
|---|---|
| Series | GAMMIX S50 Lite |
| Model | GAMMIX S50 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4 |
| Controller | SMI SM2267 |
| Max Sequential Read | ATTO: 3800 MBps CDM: 3900 MBps |
| Max Sequential Write | Up to 3200 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 540,000 IOPS |
| Terabytes Written (TBW) | 740TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | TBW: 740TB R/W speed up to 3900/3200 MB/s Ultra-fast PCIe Gen4x4 interface Capacity up to 2TB SLC Caching and DRAM cache buffer 3D NAND Flash for higher capacity and durability Advanced LDPC ECC Technology AES 256-bit encryption support Compact M.2 2280 form factor - ideal for gaming and high-end desktops |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 4.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 10.00g |
Preguntas sobre este artículo
What speeds does the PCIe 4.0 x4 interface deliver on this drive?
The PCIe 4.0 x4 interface supports up to 3900 MBps sequential read and 3200 MBps sequential write on this SSD.
What physical space does the M.2 2280 form factor with heatsink require?
The drive uses the M.2 2280 form factor and includes an aluminium heatsink that adds height; verify your motherboard slot and clearance before fitting.
How is the drive installed and what step is often missed?
Insert the M.2 2280 module at an angle into the keyed slot, secure it with the retention screw, then confirm the BIOS is set to PCIe 4.0 x4 mode for full performance.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
