Zyvpee
Zyvpee 3108NL-05W-B39 80mm 24V 0.09A 3-pin case fan
An 80 mm ball-bearing case fan running at 24 V with a 3-pin connector for CPU cooler compatibility
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Ball bearing reduces friction for longer service life
- 24 V 0.09 A input keeps power draw low
- 80 mm by 20 mm frame fits tight chassis spaces
- Three-pin connector enables speed monitoring
- Non-LED black design suits understated builds
Compact 80 mm case fan for tight builds
The Zyvpee 3108NL-05W-B39 measures 80 mm across and 20 mm thick, fitting small-form-factor chassis or CPU cooler mounts where space is limited. It runs on 24 V DC at 0.09 A through a standard three-pin connector. The black, non-LED frame keeps the look neutral for any system colour scheme.
Ball bearing sustains airflow during long sessions
A ball bearing supports the rotor, giving consistent rotation over extended periods without the wear pattern seen in sleeve designs. The fan is rated at 1485 RPM, so airflow remains steady when the system stays under load for hours. No speed curve or PWM data is supplied, so the motor runs at its fixed specification.
Low current draw keeps thermals modest
At 0.09 A the fan adds minimal heat to the loop and draws little power from the 24 V rail. Ball bearings typically produce a consistent low-level hum rather than the rattle that can develop in worn sleeve units. The 8025 form factor and inverter cooler label indicate suitability for compact cooling roles.
Puntos fuertes
- Ball bearing reduces friction for longer service life
- 24 V 0.09 A input keeps power draw low
- 80 mm by 20 mm frame fits tight chassis spaces
- Three-pin connector enables speed monitoring
- Non-LED black design suits understated builds
Especificaciones
| Brand | Zyvpee |
|---|---|
| Series | 3108NL-05W-B39 |
| Model | 3108NL-05W-B39 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 80*20MM |
Preguntas sobre este artículo
How much heat and noise does the 80 mm 24 V 0.09 A ball-bearing fan add when it runs continuously?
The fan uses a ball bearing and draws 0.09 A at 24 V, so it stays cool and quiet enough for 24/7 case airflow.
What connector and voltage must my motherboard or controller provide for the 3-pin 24 V 0.09 A fan?
You need a 3-pin header that supplies 24 V DC; the fan draws 0.09 A and has no PWM or LED wiring.
Will the 80×20 mm 3-pin fan fit the screw pattern of my older 80 mm CPU cooler?
Yes — the 80 mm frame and standard mounting holes match legacy 80 mm coolers, and the 3-pin plug works with older headers.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001038BTC
En stock