Zyvpee
Zyvpee AD0812MB-A76GL 80×25mm 12V 0.13A 3-pin case fan
80 mm DC axial fan with ball bearing spins up to 1600 RPM for CPU cooler use
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Ball bearing for longer service life
- 12 V 0.13 A draws little power
- 3-pin connector fits standard headers
- 80 × 25 mm suits compact cases
- Under 1600 RPM keeps noise low
Compact 80 mm cooling fan
The Zyvpee AD0812MB-A76GL is a 12 V DC axial fan built for CPU coolers and tight chassis spaces. It suits builders who need a straightforward replacement or supplementary airflow in small-form-factor systems.
Ball-bearing 3-pin design
A ball bearing supports the rotor for durable operation below 1600 RPM at 0.13 A. The three-pin connector delivers direct voltage control without PWM circuitry, and the 80 × 25 mm black frame fits standard mounting holes.
Non-LED upgrade for legacy headers
This unit replaces worn or noisy 80 mm fans that use three-pin headers and do not require lighting. The jump is worth it when the existing cooler mount matches the 80 mm spacing and a simple voltage-regulated fan is preferred over PWM alternatives.
Puntos fuertes
- Ball bearing for longer service life
- 12 V 0.13 A draws little power
- 3-pin connector fits standard headers
- 80 × 25 mm suits compact cases
- Under 1600 RPM keeps noise low
Especificaciones
| Brand | Zyvpee |
|---|---|
| Series | AD0812 |
| Model | AD0812MB-A76GL |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 80 * 25mm |
| Package Contents | refer to title |
Preguntas sobre este artículo
What does the 3-pin power connector limit for speed control?
The 3-pin connector supports voltage-based speed control only; it lacks the fourth PWM wire for duty-cycle regulation.
What clearance does the 80×25 mm frame need for mounting?
The fan requires an 80 mm square cut-out with 25 mm depth and four corner screw holes matching standard 80 mm spacing.
How is the fan installed and which step is often missed?
Align the four mounting holes, insert screws through the chassis into the fan frame, then connect the 3-pin header to the motherboard; the step often missed is securing all four screws evenly to prevent vibration.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001042BTC
En stock