Zyvpee
Zyvpee JF0825S1H-S 80×25 mm 12 V 0.19 A 2-wire case fan
80 mm ball-bearing case fan running at 12 V with a two-wire power connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- Ball bearing for longer service life
- 12 V 0.19 A draws little power
- 80 mm × 25 mm fits standard mounts
- 2-wire DC connection for simple wiring
- Non-LED black design keeps build clean
Compact 80 mm case fan for tight builds
The Zyvpee JF0825S1H-S is an 80×25 mm DC fan that runs on 12 V and draws 0.19 A through a two-wire power connector. Its ball bearing and non-LED black frame suit standard case mounts where space is limited and RGB lighting is not required.
Two-wire power limits speed control
The 2-wire connector supplies constant voltage, so the fan always spins at its fixed rate and cannot be modulated by PWM headers or voltage curves. Builders who need variable RPM tied to temperature sensors will find this interface does not support that function.
Replaces worn 80 mm sleeve-bearing fans
This unit serves as a direct drop-in for older 80 mm case fans that have developed noise or vibration from sleeve bearings. The upgrade is worthwhile when the existing mount matches the 80×25 mm footprint and a reliable ball-bearing replacement is preferred.
Puntos fuertes
- Ball bearing for longer service life
- 12 V 0.19 A draws little power
- 80 mm × 25 mm fits standard mounts
- 2-wire DC connection for simple wiring
- Non-LED black design keeps build clean
Especificaciones
| Brand | Zyvpee |
|---|---|
| Series | JF0825S1H-S |
| Model | JF0825S1H-S |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC Case Fan |
| Dimensions | 80*25mm |
Preguntas sobre este artículo
How do I choose between the 80 mm and 8025 mm versions?
The 80 mm figure is the frame diameter and 8025 is the same fan described as 80 × 25 mm; there is only one physical size.
What does the 12 V 0.19 A rating mean once the fan is installed?
The fan runs on a 12 V supply and draws 0.19 A, so it will spin at its rated speed when connected to a standard 12 V header or adapter.
What does the 2-wire connector cap in practice?
The 2-wire connector provides power only, so speed is fixed at the rated voltage; there is no PWM or voltage control signal for variable speed.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001056BTC
En stock