Zyvpee
Zyvpee KDE2408PTS3-6 80×25 mm 24 V 2.4 W 2-wire case fan
An 80 mm by 25 mm 24 V 2.4 W sleeve-bearing case fan with a two-wire power connector for inverter cooling
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeSleeve Bearing
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- 80 mm frame fits tight chassis spaces
- 24 V 2.4 W draw keeps power use low
- 25 mm thickness suits standard 8025 mounts
- Sleeve bearing runs quietly in inverter cooling roles
- Two-wire connector simplifies installation on CPU coolers
Zyvpee KDE2408PTS3-6 80×25 mm case fan
This 80×25 mm axial fan runs on 24 V DC power and draws 2.4 W through a two-wire connection. It uses a sleeve bearing and has no integrated lighting. The unit is built for inverter cooling duties inside a CPU cooler assembly.
Suited for inverter-cooling setups needing a 24 V
The black, non-LED frame fits equipment that supplies 24 V directly to a two-pin header. It is not suited for builds that rely on standard motherboard fan headers or PWM speed control. Buyers who need a different voltage or a three- or four-wire interface should look at other models.
24 V two-wire power specification
The 24 V, 2.4 W, two-wire electrical interface is the single detail that determines whether this fan matches the target hardware. Verify that the host device provides exactly this voltage and connector type before purchasing.
Puntos fuertes
- 80 mm frame fits tight chassis spaces
- 24 V 2.4 W draw keeps power use low
- 25 mm thickness suits standard 8025 mounts
- Sleeve bearing runs quietly in inverter cooling roles
- Two-wire connector simplifies installation on CPU coolers
Especificaciones
| Brand | Zyvpee |
|---|---|
| Series | KDE2408PTS3-6 |
| Model | KDE2408PTS3-6 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Sleeve Bearing |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling |
| Dimensions | 80*25MM |
Preguntas sobre este artículo
How often should the sleeve bearing be lubricated or the fan replaced?
Sleeve bearings run without user lubrication; plan to replace the fan when noise or vibration increases noticeably.
What stops the fan from spinning faster under continuous load?
The motor is fixed at 24 V and 2.4 W, so speed cannot exceed the factory setting regardless of load.
How much heat and noise does the 2.4 W motor produce in all-day operation?
At 2.4 W draw the motor adds minimal heat; sleeve bearing noise stays low unless the bearing wears.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001042BTC
En stock