Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14DST-F memory upgrade

SKU CH-WMJX-HYJJX

192 GB DDR5-5600 registered ECC kit (2 × 96 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H14DST-F servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 30 muuta kokoonpanoa
  • 192 GB total capacity in a 2 x 96 GB kit for full Supermicro H14DST-F population
  • DDR5 5600 speed with CL46 latency runs at rated performance on the motherboard
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin DDR5 form factor fits the exact slots required by the Supermicro H14DST-F

Exact-match DDR5 RDIMM kit

This 192GB kit contains two 96GB DDR5 5600 registered ECC modules built to the Supermicro H14DST-F memory controller specification. Each DIMM is a 2Rx4 part running at 1.1V with CL46 timing so the server recognises the full capacity at rated speed. The registered design is required by this motherboard and will not work in UDIMM or SODIMM slots.

Sustained enterprise workloads

Registered architecture offloads the memory controller allowing every slot to stay fully populated at full capacity during continuous operation. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots before they reach production systems. The 2Rx4 organisation and standard voltage maintain stability across long compute runs without throttling.

Thermals and power in normal use

Modules operate at the standard 1.1V DDR5 voltage with no heat spreaders fitted relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller contributing to lower overall system power draw. The design targets quiet rack environments where sustained airflow handles thermal dissipation without additional cooling hardware.

Kohokohdat

  • 192 GB total capacity in a 2 x 96 GB kit for full Supermicro H14DST-F population
  • DDR5 5600 speed with CL46 latency runs at rated performance on the motherboard
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin DDR5 form factor fits the exact slots required by the Supermicro H14DST-F

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.1V DDR5 RDIMM kit draw when the server runs continuously?

Each 96GB module operates at 1.1V; total system power depends on the Supermicro H14DST-F memory controller and how many slots are populated.

What must the motherboard provide for these 288-pin registered ECC modules to function?

The Supermicro H14DST-F must support DDR5 RDIMM, registered ECC, 2Rx4 organisation and 5600 MT/s operation per its qualified-vendor list.

Will the CL46 5600 MT/s timing work with slower DDR5 DIMMs already installed in other slots?

The board will run all populated slots at the lowest common speed and highest latency; mixing slower modules forces this kit to down-clock.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.