我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14DST-F memory upgrade

SKU CH-WMJX-HYJJX

192 GB DDR5-5600 registered ECC kit (2 × 96 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H14DST-F servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity in a 2 x 96 GB kit for full Supermicro H14DST-F population
  • DDR5 5600 speed with CL46 latency runs at rated performance on the motherboard
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin DDR5 form factor fits the exact slots required by the Supermicro H14DST-F

Exact-match DDR5 RDIMM kit

This 192GB kit contains two 96GB DDR5 5600 registered ECC modules built to the Supermicro H14DST-F memory controller specification. Each DIMM is a 2Rx4 part running at 1.1V with CL46 timing so the server recognises the full capacity at rated speed. The registered design is required by this motherboard and will not work in UDIMM or SODIMM slots.

Sustained enterprise workloads

Registered architecture offloads the memory controller allowing every slot to stay fully populated at full capacity during continuous operation. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots before they reach production systems. The 2Rx4 organisation and standard voltage maintain stability across long compute runs without throttling.

Thermals and power in normal use

Modules operate at the standard 1.1V DDR5 voltage with no heat spreaders fitted relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller contributing to lower overall system power draw. The design targets quiet rack environments where sustained airflow handles thermal dissipation without additional cooling hardware.

商品特色

  • 192 GB total capacity in a 2 x 96 GB kit for full Supermicro H14DST-F population
  • DDR5 5600 speed with CL46 latency runs at rated performance on the motherboard
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin DDR5 form factor fits the exact slots required by the Supermicro H14DST-F

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 1.1V DDR5 RDIMM kit draw when the server runs continuously?

Each 96GB module operates at 1.1V; total system power depends on the Supermicro H14DST-F memory controller and how many slots are populated.

What must the motherboard provide for these 288-pin registered ECC modules to function?

The Supermicro H14DST-F must support DDR5 RDIMM, registered ECC, 2Rx4 organisation and 5600 MT/s operation per its qualified-vendor list.

Will the CL46 5600 MT/s timing work with slower DDR5 DIMMs already installed in other slots?

The board will run all populated slots at the lowest common speed and highest latency; mixing slower modules forces this kit to down-clock.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。