NEMIX RAM
NEMIX RAM DDR5 512GB (4 x 128GB) 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SHM memory upgrade
512GB DDR5 6400MHz registered ECC RDIMM kit with 2Rx4 rank and CL52 latency for Supermicro H14SHM servers
- Capacity512GB (4 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
- 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches
Server memory kit for Supermicro H14SHM
This NEMIX RAM kit delivers 512 GB of DDR5 capacity in four 128 GB registered DIMMs. It is built for the Supermicro H14SHM motherboard and targets administrators who need maximum supported memory in a single validated package.
Registered ECC with 2Rx4 organisation
The modules run at 6400 MT/s with CL52 latency at 1.10 V. Registered buffering and 2Rx4 rank layout let the board run all slots fully populated while on-die ECC corrects single-bit errors before they reach the OS.
Suits fully populated H14SHM builds.
Buyers who need registered ECC RDIMMs matched to the H14SHM population rules will install this kit and boot at rated speed. Builders using desktop chipsets, laptops, or motherboards that only accept unbuffered UDIMMs must choose a different memory type.
Points forts
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
- 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions sur cet article
What does the 6400MHz rating deliver when installed in a Supermicro H14SHM server?
The kit runs at DDR5 6400 (PC5 51200) with CL52 timing and 1.1V, so each of the four 128GB modules operates at its rated speed when the motherboard populates all slots per its memory-population rules.
How does the 288-pin RDIMM interface affect usable bandwidth on this board?
The 288-pin Registered DDR5 form factor is exactly what the H14SHM requires; the registered architecture lets the memory controller drive all four slots at full 6400MHz without signal degradation.
What physical clearance do the four 128GB modules need inside the chassis?
Each module is a standard-height 288-pin RDIMM without a heat spreader, so they fit the H14SHM's DIMM slots side-by-side using the board's native latch spacing.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $US
0.00133607BTC
En stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $US
0.00010168BTC
En stock