暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 512GB (4 x 128GB) 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-EDZX-4KH5M

512GB DDR5 6400MHz registered ECC RDIMM kit with 2Rx4 rank and CL52 latency for Supermicro H14SHM servers

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
  • 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches

Server memory kit for Supermicro H14SHM

This NEMIX RAM kit delivers 512 GB of DDR5 capacity in four 128 GB registered DIMMs. It is built for the Supermicro H14SHM motherboard and targets administrators who need maximum supported memory in a single validated package.

Registered ECC with 2Rx4 organisation

The modules run at 6400 MT/s with CL52 latency at 1.10 V. Registered buffering and 2Rx4 rank layout let the board run all slots fully populated while on-die ECC corrects single-bit errors before they reach the OS.

Suits fully populated H14SHM builds.

Buyers who need registered ECC RDIMMs matched to the H14SHM population rules will install this kit and boot at rated speed. Builders using desktop chipsets, laptops, or motherboards that only accept unbuffered UDIMMs must choose a different memory type.

特長

  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
  • 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

What does the 6400MHz rating deliver when installed in a Supermicro H14SHM server?

The kit runs at DDR5 6400 (PC5 51200) with CL52 timing and 1.1V, so each of the four 128GB modules operates at its rated speed when the motherboard populates all slots per its memory-population rules.

How does the 288-pin RDIMM interface affect usable bandwidth on this board?

The 288-pin Registered DDR5 form factor is exactly what the H14SHM requires; the registered architecture lets the memory controller drive all four slots at full 6400MHz without signal degradation.

What physical clearance do the four 128GB modules need inside the chassis?

Each module is a standard-height 288-pin RDIMM without a heat spreader, so they fit the H14SHM's DIMM slots side-by-side using the board's native latch spacing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。