我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 512GB (4 x 128GB) 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-EDZX-4KH5M

512GB DDR5 6400MHz registered ECC RDIMM kit with 2Rx4 rank and CL52 latency for Supermicro H14SHM servers

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
  • 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches

Server memory kit for Supermicro H14SHM

This NEMIX RAM kit delivers 512 GB of DDR5 capacity in four 128 GB registered DIMMs. It is built for the Supermicro H14SHM motherboard and targets administrators who need maximum supported memory in a single validated package.

Registered ECC with 2Rx4 organisation

The modules run at 6400 MT/s with CL52 latency at 1.10 V. Registered buffering and 2Rx4 rank layout let the board run all slots fully populated while on-die ECC corrects single-bit errors before they reach the OS.

Suits fully populated H14SHM builds.

Buyers who need registered ECC RDIMMs matched to the H14SHM population rules will install this kit and boot at rated speed. Builders using desktop chipsets, laptops, or motherboards that only accept unbuffered UDIMMs must choose a different memory type.

商品特色

  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput on Supermicro H14SHM
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's memory-controller expectations exactly
  • 288-pin DDR5 RDIMM form factor fits the H14SHM slots without adapters or mismatches

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

What does the 6400MHz rating deliver when installed in a Supermicro H14SHM server?

The kit runs at DDR5 6400 (PC5 51200) with CL52 timing and 1.1V, so each of the four 128GB modules operates at its rated speed when the motherboard populates all slots per its memory-population rules.

How does the 288-pin RDIMM interface affect usable bandwidth on this board?

The 288-pin Registered DDR5 form factor is exactly what the H14SHM requires; the registered architecture lets the memory controller drive all four slots at full 6400MHz without signal degradation.

What physical clearance do the four 128GB modules need inside the chassis?

Each module is a standard-height 288-pin RDIMM without a heat spreader, so they fit the H14SHM's DIMM slots side-by-side using the board's native latch spacing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。