NEMIX RAM 4GB DDR3 1066 PC3-8500 CL7 1.5V 204-PIN SODIMM Laptop RAM
- 4GB
- 204-Pin DDR3 SO-DIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
NEMIX RAM
8GB DDR3 1066 SODIMM module with CL7 latency and 1.5V operation for laptop memory upgrades
Capacity 8GB
This 8 GB DDR3 SODIMM runs at 1066 MHz with a CL7 latency and 1.5 V operation. It uses a 204‑pin unbuffered non‑ECC design suited to laptops, all‑in‑one PCs, small form factor systems and NAS devices. The single module format provides a straightforward capacity increase for compatible DDR3 platforms.
Without a heat spreader the module relies on the system’s existing airflow for cooling. At 1.50 V it draws the normal power expected for DDR3 1066 operation, adding no extra acoustic load. The unbuffered layout keeps electrical demand within standard SODIMM limits for the host device.
Each module undergoes stress testing under load to verify reliability during extended use. The CL7 timing and 1.5 V specification remain consistent when the memory is fully utilised over long periods. This makes the stick suitable for environments where continuous uptime is required.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS8500-828K1 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Align the notch on the module with the key in the socket, insert it at an angle, then press down firmly until the retention clips snap into place on both sides.
No firmware is involved and there is no heat spreader or thermal pad to replace; the unbuffered DDR3 ICs run passively at the rated 1.50 volts.
The module operates at a fixed 1066 MT/s data rate with CL7 latency, so sustained bandwidth is capped by that DDR3 specification.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?