NEMIX RAM 4GB DDR3 1066 PC3-8500 CL7 1.5V 204-PIN SODIMM Laptop RAM
- 4GB
- 204-Pin DDR3 SO-DIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
8GB DDR3 1066 SODIMM module with CL7 latency and 1.5V operation for laptop memory upgrades
Capacity 8GB
This 8 GB DDR3 SODIMM runs at 1066 MHz with a CL7 latency and 1.5 V operation. It uses a 204‑pin unbuffered non‑ECC design suited to laptops, all‑in‑one PCs, small form factor systems and NAS devices. The single module format provides a straightforward capacity increase for compatible DDR3 platforms.
Without a heat spreader the module relies on the system’s existing airflow for cooling. At 1.50 V it draws the normal power expected for DDR3 1066 operation, adding no extra acoustic load. The unbuffered layout keeps electrical demand within standard SODIMM limits for the host device.
Each module undergoes stress testing under load to verify reliability during extended use. The CL7 timing and 1.5 V specification remain consistent when the memory is fully utilised over long periods. This makes the stick suitable for environments where continuous uptime is required.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS8500-828K1 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Align the notch on the module with the key in the socket, insert it at an angle, then press down firmly until the retention clips snap into place on both sides.
No firmware is involved and there is no heat spreader or thermal pad to replace; the unbuffered DDR3 ICs run passively at the rated 1.50 volts.
The module operates at a fixed 1066 MT/s data rate with CL7 latency, so sustained bandwidth is capped by that DDR3 specification.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?