NEMIX RAM 4GB DDR3 1066 PC3-8500 CL7 1.5V 204-PIN SODIMM Laptop RAM
- 4GB
- 204-Pin DDR3 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
NEMIX RAM
8GB DDR3 1066 SODIMM module with CL7 latency and 1.5V operation for laptop memory upgrades
Capacity 8GB
This 8 GB DDR3 SODIMM runs at 1066 MHz with a CL7 latency and 1.5 V operation. It uses a 204‑pin unbuffered non‑ECC design suited to laptops, all‑in‑one PCs, small form factor systems and NAS devices. The single module format provides a straightforward capacity increase for compatible DDR3 platforms.
Without a heat spreader the module relies on the system’s existing airflow for cooling. At 1.50 V it draws the normal power expected for DDR3 1066 operation, adding no extra acoustic load. The unbuffered layout keeps electrical demand within standard SODIMM limits for the host device.
Each module undergoes stress testing under load to verify reliability during extended use. The CL7 timing and 1.5 V specification remain consistent when the memory is fully utilised over long periods. This makes the stick suitable for environments where continuous uptime is required.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS8500-828K1 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Align the notch on the module with the key in the socket, insert it at an angle, then press down firmly until the retention clips snap into place on both sides.
No firmware is involved and there is no heat spreader or thermal pad to replace; the unbuffered DDR3 ICs run passively at the rated 1.50 volts.
The module operates at a fixed 1066 MT/s data rate with CL7 latency, so sustained bandwidth is capped by that DDR3 specification.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?