EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
8GB DDR4 desktop DIMM running at 2133MHz with 1.20V operation for AMD and Intel systems
This 8 GB DDR4 module runs at 2133 MHz (PC4-17000) and uses the standard 1.20 V voltage. It is built as a single 288-pin unbuffered DIMM with a 2Rx8 organisation. The memory is designed as a direct replacement for Micron MTA16ATF1G64AZ-2G1 series modules and is tested for compatibility with both AMD and Intel desktop platforms.
The tested frequency is 2133 MHz at 1.20 V with no ECC and no registered buffer. These three figures decide whether the module will post and run stably in a given motherboard. Buyers who need ECC error correction or a different data rate cannot use this part.
At the standard DDR4 voltage of 1.20 V the module draws minimal power and produces little heat during normal desktop workloads. No active cooling is required and acoustic output is negligible. Systems with restricted airflow will not see a thermal penalty from adding this memory.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is tested at 2133MHz and will operate at that speed if the motherboard and CPU memory controller support DDR4 2133; otherwise it will run at the highest speed both components can agree on.
PC4-17000 represents a peak transfer rate of 17000 MB/s for DDR4 2133; real-world throughput will be slightly lower due to protocol overhead and system latency.
It uses a 288-pin DIMM form factor designed for desktop DDR4 sockets; the module is unbuffered and non-ECC, matching standard consumer motherboard slots.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?