EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
8GB DDR4 desktop DIMM running at 2133MHz with 1.20V operation for AMD and Intel systems
This 8 GB DDR4 module runs at 2133 MHz (PC4-17000) and uses the standard 1.20 V voltage. It is built as a single 288-pin unbuffered DIMM with a 2Rx8 organisation. The memory is designed as a direct replacement for Micron MTA16ATF1G64AZ-2G1 series modules and is tested for compatibility with both AMD and Intel desktop platforms.
The tested frequency is 2133 MHz at 1.20 V with no ECC and no registered buffer. These three figures decide whether the module will post and run stably in a given motherboard. Buyers who need ECC error correction or a different data rate cannot use this part.
At the standard DDR4 voltage of 1.20 V the module draws minimal power and produces little heat during normal desktop workloads. No active cooling is required and acoustic output is negligible. Systems with restricted airflow will not see a thermal penalty from adding this memory.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is tested at 2133MHz and will operate at that speed if the motherboard and CPU memory controller support DDR4 2133; otherwise it will run at the highest speed both components can agree on.
PC4-17000 represents a peak transfer rate of 17000 MB/s for DDR4 2133; real-world throughput will be slightly lower due to protocol overhead and system latency.
It uses a 288-pin DIMM form factor designed for desktop DDR4 sockets; the module is unbuffered and non-ECC, matching standard consumer motherboard slots.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?