Syba SI-PEX40139 5-port SATA 6 Gb/s expansion card
- PCI Express to SATA…
- 5 x SATA III 6 Gb/s
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Mean Well
240 W LED driver delivers 24 V at 10 A with up to 94 % efficiency, active PFC and IP67/IP65 protection for indoor or outdoor lighting
The Mean Well HLG-240H-24 is a 24 V, 10 A switching power supply designed for LED lighting and street lighting applications. It accepts a universal AC input up to 305 VAC and delivers 240 W through a single output. The IP67 and IP65 rated enclosure suits both indoor and outdoor installations. It meets Type HL requirements for Class I, Division 2 hazardous locations.
Replacing an unsealed or lower-efficiency driver with this unit adds active PFC and up to 94% efficiency, reducing waste heat and improving power factor. The jump is worth it when installations demand IP67 or IP65 ingress protection, 4 kV surge immunity per IEC 61000-4-5, or adjustable output current for precise LED drive. Builders needing only basic indoor coverage without dimming or surge rating may not require this specification.
Cooling relies on free air convection, so sustained output depends on ambient airflow rather than forced fans. The built-in protections — short circuit, over current, over voltage and over temperature — maintain safe operation during prolonged use. High efficiency up to 94% minimises internal heat rise, supporting reliable performance in sealed outdoor enclosures where active cooling is impractical.
| Type | AT |
|---|
The unit cools by free air convection, so leave open space around the housing; do not seal it inside an insulated cavity or stack items against the fins.
Connect the dimming leads (1-10 VDC, PWM, or resistance) to the correct terminals and verify polarity before applying mains power.
Verify the output current setting after the first 24 hours of operation and again if the load changes or ambient temperature shifts significantly.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?