We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply unit with IP67/IP65 rating, 240W 24V 10A output

Mean Well

Mean Well HLG-240H-24 24V 10A 240W LED Switching Power Supply

SKU CH-0GNR-TR7F6

240 W LED driver delivers 24 V at 10 A with up to 94 % efficiency, active PFC and IP67/IP65 protection for indoor or outdoor lighting

  • TypeAT
  • Reliable power delivery with 240W continuous output
  • Efficient operation reaching up to 94% efficiency
  • Weather-resistant IP67 and IP65 rated enclosure
  • Comprehensive protection against short circuit, over current, voltage and temperature
  • Adjustable output current for flexible LED lighting control

240 W LED Driver for Indoor and Outdoor Lighting

The Mean Well HLG-240H-24 is a 24 V, 10 A switching power supply designed for LED lighting and street lighting applications. It accepts a universal AC input up to 305 VAC and delivers 240 W through a single output. The IP67 and IP65 rated enclosure suits both indoor and outdoor installations. It meets Type HL requirements for Class I, Division 2 hazardous locations.

Upgrade from Lower-Efficiency or Unsealed Supplies

Replacing an unsealed or lower-efficiency driver with this unit adds active PFC and up to 94% efficiency, reducing waste heat and improving power factor. The jump is worth it when installations demand IP67 or IP65 ingress protection, 4 kV surge immunity per IEC 61000-4-5, or adjustable output current for precise LED drive. Builders needing only basic indoor coverage without dimming or surge rating may not require this specification.

Convection-Cooled Stability Under Continuous Load

Cooling relies on free air convection, so sustained output depends on ambient airflow rather than forced fans. The built-in protections — short circuit, over current, over voltage and over temperature — maintain safe operation during prolonged use. High efficiency up to 94% minimises internal heat rise, supporting reliable performance in sealed outdoor enclosures where active cooling is impractical.

Highlights

  • Reliable power delivery with 240W continuous output
  • Efficient operation reaching up to 94% efficiency
  • Weather-resistant IP67 and IP65 rated enclosure
  • Comprehensive protection against short circuit, over current, voltage and temperature
  • Adjustable output current for flexible LED lighting control

Specifications

TypeAT

Questions about this item

What mounting clearance does the IP67 rated HLG-240H-24 need for free air convection cooling?

The unit cools by free air convection, so leave open space around the housing; do not seal it inside an insulated cavity or stack items against the fins.

Which wiring step is most often missed when installing the B-Type with 3-in-1 dimming?

Connect the dimming leads (1-10 VDC, PWM, or resistance) to the correct terminals and verify polarity before applying mains power.

When should the internal potentiometer on the A-Type be re-checked after installation?

Verify the output current setting after the first 24 hours of operation and again if the load changes or ambient temperature shifts significantly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.