Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR4 UDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade for Supermicro MBD-C9Z490-PG

SKU CH-H4EZ-BFYY5

16 GB DDR4 2933 CL21 UDIMM kit (2 × 8 GB) validated for Supermicro MBD-C9Z490-PG workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

Supermicro MBD-C9Z490-PG DDR4 kit

This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the Supermicro MBD-C9Z490-PG motherboard. It targets builders upgrading that specific board with matched, tested memory. Buyers needing ECC error correction or registered buffering should look elsewhere, as this kit provides neither.

Two-slot unbuffered 288-pin DDR4 upgrade

The modules install directly into standard 288-pin DDR4 DIMM slots without additional cables or power connectors. Running at 1.2V, they draw minimal power from the motherboard and leave headroom for other components. The kit occupies two slots, so systems with only two slots will reach maximum capacity with this upgrade.

Low-voltage CL21 modules without heat spreaders

Operating at DDR4 2933 with CL21 latency and 1.2V, the sticks run cool enough to forego heat spreaders in normal airflow. No moving parts means silent operation. Power draw stays low thanks to the standard DDR4 voltage, keeping thermal load modest inside the chassis.

Punti di forza

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Domande su questo articolo

Will the CL21 latency become a bottleneck during sustained workloads?

CL21 is the rated CAS latency for these DDR4 2933 modules; sustained throughput is determined by the memory controller and workload profile.

How much heat do the 1.20 V modules add to a chassis running continuously?

At 1.20 V these unbuffered UDIMMs draw standard DDR4 power and have no heat spreader, so case airflow handles the thermal load.

Which motherboard slot layout is required for the 288‑pin kit to work?

The kit installs in two standard 288‑pin DDR4 DIMM slots on the Supermicro MBD‑C9Z490‑PG board.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.