Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR4 UDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade for Supermicro MBD-C9Z490-PG

SKU CH-H4EZ-BFYY5

16 GB DDR4 2933 CL21 UDIMM kit (2 × 8 GB) validated for Supermicro MBD-C9Z490-PG workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

Supermicro MBD-C9Z490-PG DDR4 kit

This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the Supermicro MBD-C9Z490-PG motherboard. It targets builders upgrading that specific board with matched, tested memory. Buyers needing ECC error correction or registered buffering should look elsewhere, as this kit provides neither.

Two-slot unbuffered 288-pin DDR4 upgrade

The modules install directly into standard 288-pin DDR4 DIMM slots without additional cables or power connectors. Running at 1.2V, they draw minimal power from the motherboard and leave headroom for other components. The kit occupies two slots, so systems with only two slots will reach maximum capacity with this upgrade.

Low-voltage CL21 modules without heat spreaders

Operating at DDR4 2933 with CL21 latency and 1.2V, the sticks run cool enough to forego heat spreaders in normal airflow. No moving parts means silent operation. Power draw stays low thanks to the standard DDR4 voltage, keeping thermal load modest inside the chassis.

Pontos fortes

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

Especificações

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Perguntas sobre este artigo

Will the CL21 latency become a bottleneck during sustained workloads?

CL21 is the rated CAS latency for these DDR4 2933 modules; sustained throughput is determined by the memory controller and workload profile.

How much heat do the 1.20 V modules add to a chassis running continuously?

At 1.20 V these unbuffered UDIMMs draw standard DDR4 power and have no heat spreader, so case airflow handles the thermal load.

Which motherboard slot layout is required for the 288‑pin kit to work?

The kit installs in two standard 288‑pin DDR4 DIMM slots on the Supermicro MBD‑C9Z490‑PG board.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.