저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green DDR4 UDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade for Supermicro MBD-C9Z490-PG

SKU CH-H4EZ-BFYY5

16 GB DDR4 2933 CL21 UDIMM kit (2 × 8 GB) validated for Supermicro MBD-C9Z490-PG workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

Supermicro MBD-C9Z490-PG DDR4 kit

This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the Supermicro MBD-C9Z490-PG motherboard. It targets builders upgrading that specific board with matched, tested memory. Buyers needing ECC error correction or registered buffering should look elsewhere, as this kit provides neither.

Two-slot unbuffered 288-pin DDR4 upgrade

The modules install directly into standard 288-pin DDR4 DIMM slots without additional cables or power connectors. Running at 1.2V, they draw minimal power from the motherboard and leave headroom for other components. The kit occupies two slots, so systems with only two slots will reach maximum capacity with this upgrade.

Low-voltage CL21 modules without heat spreaders

Operating at DDR4 2933 with CL21 latency and 1.2V, the sticks run cool enough to forego heat spreaders in normal airflow. No moving parts means silent operation. Power draw stays low thanks to the standard DDR4 voltage, keeping thermal load modest inside the chassis.

주요 특징

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2933 speed matches board spec for stable operation
  • CL21 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
  • Major-brand DRAM chips tested under load for reliability

사양

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

이 상품에 대한 질문

Will the CL21 latency become a bottleneck during sustained workloads?

CL21 is the rated CAS latency for these DDR4 2933 modules; sustained throughput is determined by the memory controller and workload profile.

How much heat do the 1.20 V modules add to a chassis running continuously?

At 1.20 V these unbuffered UDIMMs draw standard DDR4 power and have no heat spreader, so case airflow handles the thermal load.

Which motherboard slot layout is required for the 288‑pin kit to work?

The kit installs in two standard 288‑pin DDR4 DIMM slots on the Supermicro MBD‑C9Z490‑PG board.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.