BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277543BTC
現貨
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade for Supermicro MBD-C9Z490-PG
16 GB DDR4 2933 CL21 UDIMM kit (2 × 8 GB) validated for Supermicro MBD-C9Z490-PG workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking capacity
- DDR4 2933 speed matches board spec for stable operation
- CL21 latency at 1.2 V keeps power draw low
- 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
- Major-brand DRAM chips tested under load for reliability
Supermicro MBD-C9Z490-PG DDR4 kit
This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the Supermicro MBD-C9Z490-PG motherboard. It targets builders upgrading that specific board with matched, tested memory. Buyers needing ECC error correction or registered buffering should look elsewhere, as this kit provides neither.
Two-slot unbuffered 288-pin DDR4 upgrade
The modules install directly into standard 288-pin DDR4 DIMM slots without additional cables or power connectors. Running at 1.2V, they draw minimal power from the motherboard and leave headroom for other components. The kit occupies two slots, so systems with only two slots will reach maximum capacity with this upgrade.
Low-voltage CL21 modules without heat spreaders
Operating at DDR4 2933 with CL21 latency and 1.2V, the sticks run cool enough to forego heat spreaders in normal airflow. No moving parts means silent operation. Power draw stays low thanks to the standard DDR4 voltage, keeping thermal load modest inside the chassis.
商品特色
- 16 GB dual-channel kit boosts multitasking capacity
- DDR4 2933 speed matches board spec for stable operation
- CL21 latency at 1.2 V keeps power draw low
- 288-pin UDIMM form factor fits Supermicro MBD-C9Z490-PG slots
- Major-brand DRAM chips tested under load for reliability
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
商品問答
Will the CL21 latency become a bottleneck during sustained workloads?
CL21 is the rated CAS latency for these DDR4 2933 modules; sustained throughput is determined by the memory controller and workload profile.
How much heat do the 1.20 V modules add to a chassis running continuously?
At 1.20 V these unbuffered UDIMMs draw standard DDR4 power and have no heat spreader, so case airflow handles the thermal load.
Which motherboard slot layout is required for the 288‑pin kit to work?
The kit installs in two standard 288‑pin DDR4 DIMM slots on the Supermicro MBD‑C9Z490‑PG board.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
