Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 260-pin DDR4 SODIMM module, 16GB capacity

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM for POSIFLEX EK-2132

SKU CH-NDSS-S4PJG

16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM built for POSIFLEX EK-2132 kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2132 kiosk performance
  • CL22 1.2V operation keeps power draw low in compact terminals
  • 2Rx8 260-pin layout matches factory slot specification exactly
  • Samsung Micron Hynix chipset ensures stable mission-critical uptime
  • Non-ECC unbuffered design installs in minutes with no configuration needed

POSIFLEX EK-2132 Compatible SODIMM

This 16 GB DDR4 3200 module is built specifically for the POSIFLEX EK-2132 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with CL22 latency and 1.2 V operation. The single stick delivers 16 GB in a 2Rx8 layout without ECC or a heat spreader.

Upgrade from lower capacity or slower DDR4

Replacing a smaller or slower DDR4 SODIMM with this 16 GB PC4-25600 unit adds headroom for multi-tasking and POS workloads. The jump is worthwhile when the kiosk currently runs 8 GB or a lower speed grade and the board accepts 3200 MT/s modules.

Verify slot count and maximum supported memory

Confirm the EK-2132 has a free SODIMM slot or that you are replacing the only installed stick. Check the system manual for the maximum total memory and supported rank configuration before ordering.

Punti di forza

  • 16GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2132 kiosk performance
  • CL22 1.2V operation keeps power draw low in compact terminals
  • 2Rx8 260-pin layout matches factory slot specification exactly
  • Samsung Micron Hynix chipset ensures stable mission-critical uptime
  • Non-ECC unbuffered design installs in minutes with no configuration needed

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Domande su questo articolo

Does this 260-pin DDR4 SODIMM fit the POSIFLEX EK-2132 memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built to the PC4-25600 standard and validated for the POSIFLEX EK-2132 Mercury Series kiosk.

How do I install this 16 GB stick, and what step is often missed?

Power off the kiosk, open the memory door, align the notch on the 260-pin edge connector, press firmly until both side clips snap shut, then confirm 16 GB appears in BIOS before closing the case.

Will the Samsung, Micron or Hynix chips on this module need replacement or special care later?

No scheduled maintenance is required; the chips are stress-tested at 1.2 V and CL22, and the module carries a lifetime replacement warranty if a fault ever develops.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.