We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 260-pin DDR4 SODIMM module, 16GB capacity

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM for POSIFLEX EK-2132

SKU CH-NDSS-S4PJG

16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM built for POSIFLEX EK-2132 kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2132 kiosk performance
  • CL22 1.2V operation keeps power draw low in compact terminals
  • 2Rx8 260-pin layout matches factory slot specification exactly
  • Samsung Micron Hynix chipset ensures stable mission-critical uptime
  • Non-ECC unbuffered design installs in minutes with no configuration needed

POSIFLEX EK-2132 Compatible SODIMM

This 16 GB DDR4 3200 module is built specifically for the POSIFLEX EK-2132 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with CL22 latency and 1.2 V operation. The single stick delivers 16 GB in a 2Rx8 layout without ECC or a heat spreader.

Upgrade from lower capacity or slower DDR4

Replacing a smaller or slower DDR4 SODIMM with this 16 GB PC4-25600 unit adds headroom for multi-tasking and POS workloads. The jump is worthwhile when the kiosk currently runs 8 GB or a lower speed grade and the board accepts 3200 MT/s modules.

Verify slot count and maximum supported memory

Confirm the EK-2132 has a free SODIMM slot or that you are replacing the only installed stick. Check the system manual for the maximum total memory and supported rank configuration before ordering.

Highlights

  • 16GB DDR4 3200 SODIMM upgrades POSIFLEX EK-2132 kiosk performance
  • CL22 1.2V operation keeps power draw low in compact terminals
  • 2Rx8 260-pin layout matches factory slot specification exactly
  • Samsung Micron Hynix chipset ensures stable mission-critical uptime
  • Non-ECC unbuffered design installs in minutes with no configuration needed

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does this 260-pin DDR4 SODIMM fit the POSIFLEX EK-2132 memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built to the PC4-25600 standard and validated for the POSIFLEX EK-2132 Mercury Series kiosk.

How do I install this 16 GB stick, and what step is often missed?

Power off the kiosk, open the memory door, align the notch on the 260-pin edge connector, press firmly until both side clips snap shut, then confirm 16 GB appears in BIOS before closing the case.

Will the Samsung, Micron or Hynix chips on this module need replacement or special care later?

No scheduled maintenance is required; the chips are stress-tested at 1.2 V and CL22, and the module carries a lifetime replacement warranty if a fault ever develops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.