OWC 1TB (8x128GB) DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Load Reduced LRDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
A 1 TB DDR4 ECC load-reduced kit of four 256 GB modules at 3200 MHz CL22 for compatible HP ProLiant servers
Capacity 1TB (4 x 256GB)
This kit provides one terabyte of DDR4 memory in four 256-gigabyte load-reduced DIMMs. It is built for HP ProLiant DL325 Gen10 Plus v2, DL345, DL360, DL365 and DL380 Gen10 Plus servers that require ECC load-reduced modules. Standard desktop systems cannot use this memory type. Mixing with unbuffered or registered ECC DIMMs is not supported.
Load-reduced architecture reduces electrical load on the memory bus, allowing all four modules to run at the rated 3200 MT/s without signal degradation during long-running tasks. The CL22 latency and 1.2-volt operation remain stable under continuous utilisation. Backward compatibility with 2133, 2400, 2666 and 2933 MT/s lets the kit downclock automatically if the platform requires a lower speed.
The defining attribute is the ECC load-reduced 288-pin DIMM form factor combined with an 8Rx4 organisation. Only systems that explicitly support this exact memory type can accept the kit. Buyers whose servers require registered ECC, unbuffered ECC or non-ECC memory must choose a different module.
Nessuna caratteristica ancora pubblicata per questo articolo.
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Each module operates at 1.2 volts, the standard DDR4 voltage, so total power scales with the four 256 GB sticks installed.
The kit needs a server or workstation board with 288-pin DDR4 slots that support LRDIMM; it will not work with unbuffered or registered ECC memory.
Yes, the modules are backward compatible with 2133, 2400, 2666 and 2933 MHz speeds and will down-clock to match the slowest installed DIMMs.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?