OWC 1TB (8x128GB) DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Load Reduced LRDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
A 1 TB DDR4 ECC load-reduced kit of four 256 GB modules at 3200 MHz CL22 for compatible HP ProLiant servers
Capacity 1TB (4 x 256GB)
This kit provides one terabyte of DDR4 memory in four 256-gigabyte load-reduced DIMMs. It is built for HP ProLiant DL325 Gen10 Plus v2, DL345, DL360, DL365 and DL380 Gen10 Plus servers that require ECC load-reduced modules. Standard desktop systems cannot use this memory type. Mixing with unbuffered or registered ECC DIMMs is not supported.
Load-reduced architecture reduces electrical load on the memory bus, allowing all four modules to run at the rated 3200 MT/s without signal degradation during long-running tasks. The CL22 latency and 1.2-volt operation remain stable under continuous utilisation. Backward compatibility with 2133, 2400, 2666 and 2933 MT/s lets the kit downclock automatically if the platform requires a lower speed.
The defining attribute is the ECC load-reduced 288-pin DIMM form factor combined with an 8Rx4 organisation. Only systems that explicitly support this exact memory type can accept the kit. Buyers whose servers require registered ECC, unbuffered ECC or non-ECC memory must choose a different module.
Aún no hay especificaciones publicadas para este artículo.
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Each module operates at 1.2 volts, the standard DDR4 voltage, so total power scales with the four 256 GB sticks installed.
The kit needs a server or workstation board with 288-pin DDR4 slots that support LRDIMM; it will not work with unbuffered or registered ECC memory.
Yes, the modules are backward compatible with 2133, 2400, 2666 and 2933 MHz speeds and will down-clock to match the slowest installed DIMMs.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?