Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Beige 50 by 10 mm maglev case fan three pin connector

Zyvpee

Zyvpee KDE1205PFV3 50*10MM 12V .7W 3 Pin Maglev Beige case fan

SKU CH-35K3-RXVY3

A 50 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.7 W for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBeige / Brown
  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Compact 50 mm CPU cooler fan

The Zyvpee KDE1205PFV3 is a 50 by 10 mm case fan built for CPU cooler mounting. It runs on 12 V power and draws 0.7 W through a three pin connector. Maglev bearing keeps friction low at speeds below 1600 RPM. The beige brown frame carries no LED lighting.

Three pin voltage control limit

A three pin header adjusts speed by varying voltage, so the motherboard must support voltage based fan control. PWM signalling is not available on this connector. Maximum rotational speed stays under 1600 RPM, which bounds the airflow ceiling. Builders needing PWM curves or higher static pressure should look elsewhere.

50 mm frame decides fit

The 50 by 10 mm footprint is the single dimension that determines whether this fan matches your cooler or chassis mount. Verify the exact hole spacing and clearance before ordering. No other specification overrides this physical constraint.

Punti di forza

  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Caratteristiche tecniche

BrandZyvpee
SeriesKDE1205PFV3
ModelKDE1205PFV3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBeige / Brown
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions50*10MM

Domande su questo articolo

Should I pick this 50*10MM maglev model or a different size?

This fan is exactly 50 mm square and 10 mm thick with a maglev bearing; choose it only if your CPU cooler or chassis mount accepts those dimensions.

What does the sub-1600 RPM rating deliver in an actual build?

At under 1600 RPM the fan moves a modest airflow suited to low-profile CPU coolers while keeping noise low for a 12 V, 0.7 W design.

How does the 3-pin connector limit speed control?

The 3-pin header allows voltage-based regulation only, so the motherboard can vary speed but cannot use PWM signalling for finer granularity.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.