Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Beige 50 by 10 mm maglev case fan three pin connector

Zyvpee

Zyvpee KDE1205PFV3 50*10MM 12V .7W 3 Pin Maglev Beige case fan

SKU CH-35K3-RXVY3

A 50 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.7 W for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBeige / Brown
  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Compact 50 mm CPU cooler fan

The Zyvpee KDE1205PFV3 is a 50 by 10 mm case fan built for CPU cooler mounting. It runs on 12 V power and draws 0.7 W through a three pin connector. Maglev bearing keeps friction low at speeds below 1600 RPM. The beige brown frame carries no LED lighting.

Three pin voltage control limit

A three pin header adjusts speed by varying voltage, so the motherboard must support voltage based fan control. PWM signalling is not available on this connector. Maximum rotational speed stays under 1600 RPM, which bounds the airflow ceiling. Builders needing PWM curves or higher static pressure should look elsewhere.

50 mm frame decides fit

The 50 by 10 mm footprint is the single dimension that determines whether this fan matches your cooler or chassis mount. Verify the exact hole spacing and clearance before ordering. No other specification overrides this physical constraint.

Pluspunten

  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Specificaties

BrandZyvpee
SeriesKDE1205PFV3
ModelKDE1205PFV3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBeige / Brown
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions50*10MM

Vragen over dit artikel

Should I pick this 50*10MM maglev model or a different size?

This fan is exactly 50 mm square and 10 mm thick with a maglev bearing; choose it only if your CPU cooler or chassis mount accepts those dimensions.

What does the sub-1600 RPM rating deliver in an actual build?

At under 1600 RPM the fan moves a modest airflow suited to low-profile CPU coolers while keeping noise low for a 12 V, 0.7 W design.

How does the 3-pin connector limit speed control?

The 3-pin header allows voltage-based regulation only, so the motherboard can vary speed but cannot use PWM signalling for finer granularity.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.