Zyvpee
Zyvpee KDE1205PFV3 50*10MM 12V .7W 3 Pin Maglev Beige case fan
A 50 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.7 W for CPU cooling
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBeige / Brown
- Maglev bearing reduces friction for quieter operation
- 12 V .7 W design keeps power draw low
- 50 mm x 10 mm frame fits tight CPU cooler mounts
- Three-pin connector enables motherboard speed monitoring
- Sub-1600 RPM ceiling limits maximum noise output
Compact 50 mm CPU cooler fan
The Zyvpee KDE1205PFV3 is a 50 by 10 mm case fan built for CPU cooler mounting. It runs on 12 V power and draws 0.7 W through a three pin connector. Maglev bearing keeps friction low at speeds below 1600 RPM. The beige brown frame carries no LED lighting.
Three pin voltage control limit
A three pin header adjusts speed by varying voltage, so the motherboard must support voltage based fan control. PWM signalling is not available on this connector. Maximum rotational speed stays under 1600 RPM, which bounds the airflow ceiling. Builders needing PWM curves or higher static pressure should look elsewhere.
50 mm frame decides fit
The 50 by 10 mm footprint is the single dimension that determines whether this fan matches your cooler or chassis mount. Verify the exact hole spacing and clearance before ordering. No other specification overrides this physical constraint.
Besonderheiten
- Maglev bearing reduces friction for quieter operation
- 12 V .7 W design keeps power draw low
- 50 mm x 10 mm frame fits tight CPU cooler mounts
- Three-pin connector enables motherboard speed monitoring
- Sub-1600 RPM ceiling limits maximum noise output
Technische Daten
| Brand | Zyvpee |
|---|---|
| Series | KDE1205PFV3 |
| Model | KDE1205PFV3 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Beige / Brown |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 50*10MM |
Fragen zu diesem Artikel
Should I pick this 50*10MM maglev model or a different size?
This fan is exactly 50 mm square and 10 mm thick with a maglev bearing; choose it only if your CPU cooler or chassis mount accepts those dimensions.
What does the sub-1600 RPM rating deliver in an actual build?
At under 1600 RPM the fan moves a modest airflow suited to low-profile CPU coolers while keeping noise low for a 12 V, 0.7 W design.
How does the 3-pin connector limit speed control?
The 3-pin header allows voltage-based regulation only, so the motherboard can vary speed but cannot use PWM signalling for finer granularity.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001042BTC
Auf Lager