Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Beige 50 by 10 mm maglev case fan three pin connector

Zyvpee

Zyvpee KDE1205PFV3 50*10MM 12V .7W 3 Pin Maglev Beige case fan

SKU CH-35K3-RXVY3

A 50 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.7 W for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBeige / Brown
  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Compact 50 mm CPU cooler fan

The Zyvpee KDE1205PFV3 is a 50 by 10 mm case fan built for CPU cooler mounting. It runs on 12 V power and draws 0.7 W through a three pin connector. Maglev bearing keeps friction low at speeds below 1600 RPM. The beige brown frame carries no LED lighting.

Three pin voltage control limit

A three pin header adjusts speed by varying voltage, so the motherboard must support voltage based fan control. PWM signalling is not available on this connector. Maximum rotational speed stays under 1600 RPM, which bounds the airflow ceiling. Builders needing PWM curves or higher static pressure should look elsewhere.

50 mm frame decides fit

The 50 by 10 mm footprint is the single dimension that determines whether this fan matches your cooler or chassis mount. Verify the exact hole spacing and clearance before ordering. No other specification overrides this physical constraint.

Points forts

  • Maglev bearing reduces friction for quieter operation
  • 12 V .7 W design keeps power draw low
  • 50 mm x 10 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables motherboard speed monitoring
  • Sub-1600 RPM ceiling limits maximum noise output

Caractéristiques

BrandZyvpee
SeriesKDE1205PFV3
ModelKDE1205PFV3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBeige / Brown
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions50*10MM

Questions sur cet article

Should I pick this 50*10MM maglev model or a different size?

This fan is exactly 50 mm square and 10 mm thick with a maglev bearing; choose it only if your CPU cooler or chassis mount accepts those dimensions.

What does the sub-1600 RPM rating deliver in an actual build?

At under 1600 RPM the fan moves a modest airflow suited to low-profile CPU coolers while keeping noise low for a 12 V, 0.7 W design.

How does the 3-pin connector limit speed control?

The 3-pin header allows voltage-based regulation only, so the motherboard can vary speed but cannot use PWM signalling for finer granularity.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.