EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
16 GB DDR3L 1333 MHz ECC registered DIMM with 2Rx4 organization and 1.35 V low voltage operation
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It is a registered ECC DIMM built with a 2Rx4 organisation for server and workstation platforms. The 240-pin form factor fits DDR3L slots in compatible systems.
This module suits administrators upgrading or repairing servers that require registered ECC DDR3L at 1333MHz. It matches the listed Kingston part numbers for direct replacement. Buyers whose platforms only accept unbuffered non-ECC DDR3 or a different voltage should look at something else.
The registered ECC design with 2Rx4 rank organisation is the specification that determines compatibility. Systems that demand registered error-correcting memory at this rank configuration will accept this module; those that do not will not.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, this is a DDR3L 240-pin registered DIMM that requires a compatible server or workstation motherboard with an RDIMM slot supporting 1.35V operation.
Mixing voltages is not recommended; the motherboard will typically run all modules at the higher 1.5V, which exceeds this module's 1.35V rating and may cause instability.
Enter the BIOS or UEFI during boot and check the memory information screen; it should show 1333MHz speed, 16GB capacity, and ECC or registered status enabled.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?