We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3L ECC registered DIMM with black chips

A-Tech

A-Tech 16GB DDR3L 1333MHz PC3L-10600 ECC RDIMM 2Rx4 Server Memory

SKU CH-59PR-RCCF4

16 GB DDR3L 1333 MHz ECC registered DIMM with 2Rx4 organization and 1.35 V low voltage operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity supports heavy server workloads
  • DDR3L 1333MHz speed delivers responsive data handling
  • ECC registered design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM fits compatible server slots

16GB DDR3L 1333MHz ECC Registered DIMM

This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It is a registered ECC DIMM built with a 2Rx4 organisation for server and workstation platforms. The 240-pin form factor fits DDR3L slots in compatible systems.

Suits servers needing registered ECC memory

This module suits administrators upgrading or repairing servers that require registered ECC DDR3L at 1333MHz. It matches the listed Kingston part numbers for direct replacement. Buyers whose platforms only accept unbuffered non-ECC DDR3 or a different voltage should look at something else.

Registered ECC with 2Rx4 organisation

The registered ECC design with 2Rx4 rank organisation is the specification that determines compatibility. Systems that demand registered error-correcting memory at this rank configuration will accept this module; those that do not will not.

Highlights

  • 16GB capacity supports heavy server workloads
  • DDR3L 1333MHz speed delivers responsive data handling
  • ECC registered design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM fits compatible server slots

Specifications

BrandA-Tech
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Does my server need a DDR3L 240-pin RDIMM slot to use this 16GB module?

Yes, this is a DDR3L 240-pin registered DIMM that requires a compatible server or workstation motherboard with an RDIMM slot supporting 1.35V operation.

Can I mix this 1.35V DDR3L 1333MHz ECC RDIMM with existing 1.5V DDR3 modules in the same system?

Mixing voltages is not recommended; the motherboard will typically run all modules at the higher 1.5V, which exceeds this module's 1.35V rating and may cause instability.

How can I verify the module is running at 1333MHz with ECC active after installation?

Enter the BIOS or UEFI during boot and check the memory information screen; it should show 1333MHz speed, 16GB capacity, and ECC or registered status enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.