EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
16 GB DDR3L 1333 MHz ECC registered DIMM with 2Rx4 organization and 1.35 V low voltage operation
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It is a registered ECC DIMM built with a 2Rx4 organisation for server and workstation platforms. The 240-pin form factor fits DDR3L slots in compatible systems.
This module suits administrators upgrading or repairing servers that require registered ECC DDR3L at 1333MHz. It matches the listed Kingston part numbers for direct replacement. Buyers whose platforms only accept unbuffered non-ECC DDR3 or a different voltage should look at something else.
The registered ECC design with 2Rx4 rank organisation is the specification that determines compatibility. Systems that demand registered error-correcting memory at this rank configuration will accept this module; those that do not will not.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, this is a DDR3L 240-pin registered DIMM that requires a compatible server or workstation motherboard with an RDIMM slot supporting 1.35V operation.
Mixing voltages is not recommended; the motherboard will typically run all modules at the higher 1.5V, which exceeds this module's 1.35V rating and may cause instability.
Enter the BIOS or UEFI during boot and check the memory information screen; it should show 1333MHz speed, 16GB capacity, and ECC or registered status enabled.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
No language matches that.
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?