暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR3 ECC UDIMM sticks, 240-pin, silver heat spreaders

A-Tech

A-Tech 32GB (8x4GB) DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-CVWJ-74ZJN

Eight 4 GB DDR3 1600 ECC unbuffered DIMMs totalling 32 GB for servers and workstations

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (8 x 4GB)

Speed DDR3 1600 (PC3 12800)

  • 32 GB kit expands server capacity for larger workloads
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

32GB DDR3 ECC kit for servers

This 32GB kit contains eight 4GB DDR3 1600 ECC UDIMM modules built for server and workstation platforms that require error-correcting unbuffered memory. It is not compatible with standard desktop or laptop computers. Buyers who need memory for consumer motherboards cannot use this kit.

240-pin unbuffered dual-rank modules

Each module uses a 240-pin DIMM form factor with a 2Rx8 dual-rank layout and operates at the standard 1.5V DDR3 voltage. The unbuffered design connects directly to the memory controller without a register, so the system must support ECC UDIMM specifically. Builders whose boards require registered DIMMs cannot install these modules.

DDR3 1600 CL11 interface limits

The kit runs at DDR3 1600 (PC3-12800) with a CAS latency of 11, which defines the maximum throughput and timing envelope of this interface. Systems limited to lower DDR3 speeds will downclock the modules automatically. Workloads that demand higher bandwidth or newer DDR generations must use a different platform.

特長

  • 32 GB kit expands server capacity for larger workloads
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 5 V standard voltage ensures broad DDR3 platform compatibility

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-12800E
Capacity32GB (8 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What bandwidth does the PC3-12800E DDR3 interface cap at in practice?

The PC3-12800E DDR3 standard caps theoretical bandwidth at 12,800 MB/s per module; real-world throughput is lower due to protocol overhead and system timing.

What physical slot and clearance does this 240-pin DDR3 UDIMM kit require?

Each module uses a standard 240-pin DDR3 DIMM slot; ensure the server or workstation chassis has enough vertical clearance for eight full-height sticks.

How do I install the eight 4 GB modules and what is the common mistake?

Power off, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click; the common mistake is not seating all eight modules fully or ignoring the motherboard's channel population order.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。