暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1600 ECC UDIMM 1Rx8 1.5V 240-Pin Server RAM

SKU CH-TAN5-WAEPT

4GB DDR3 1600 ECC unbuffered DIMM with CL11 latency for servers and workstations

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3 1600 (PC3 12800)

  • ECC protects data integrity in servers with single-bit error correction
  • 1600 MHz DDR3 speed accelerates workloads with PC3-12800 bandwidth
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • 240-pin UDIMM form factor fits DDR3 server and workstation slots

Server memory upgrade for DDR3 ECC platforms

This 4 GB DDR3 1600 MHz module adds capacity to servers and workstations that require ECC unbuffered DIMMs. The single-rank x8 organisation works with systems qualified for PC3-12800E memory. It is not compatible with standard desktop or laptop computers.

Standard voltage operation with ECC integrity

The module runs at the JEDEC-standard 1.5 V, drawing typical power for DDR3 1600 MHz ECC UDIMMs. Error-correcting code protects data integrity during continuous workloads without generating additional heat or acoustic load beyond the platform's normal memory subsystem.

Ready-to-install single module

The 240-pin DIMM arrives tested and qualified for immediate installation in supported DDR3 ECC unbuffered slots. No extra cables, brackets or configuration utilities are included; the performance gain comes from the added capacity and ECC protection alone.

特長

  • ECC protects data integrity in servers with single-bit error correction
  • 1600 MHz DDR3 speed accelerates workloads with PC3-12800 bandwidth
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • 240-pin UDIMM form factor fits DDR3 server and workstation slots

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-12800E
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 240-pin DDR3 ECC UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press firmly until both side clips click shut, then verify the system detects the full 4 GB capacity in BIOS or the OS memory report.

What maintenance or replacement will this module need later?

No routine maintenance is required; if errors appear, run a memory diagnostic and replace the stick if it fails, otherwise it runs for the life of the server.

What limit appears first under sustained load with this CL11 1.5 V module?

The CL11 latency at 1600 MHz sets the throughput ceiling, so sustained bandwidth maxes out at the PC3-12800 rate before voltage or thermal limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。