暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board with black chips and gold edge contacts

A-Tech

A-Tech 4GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V server RAM

SKU CH-892B-7WBPE

A 4 GB DDR4 2400 ECC registered module with CL17 latency and 1.2 V operation for server and workstation upgrades

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 4GB

  • ECC protection prevents data corruption in server workloads
  • Registered buffering stabilises signals for reliable 2400 MHz operation
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Standard 1.2 V DDR4 voltage reduces power draw per module
  • 288-pin DIMM form factor fits DDR4 server and workstation slots

Server DDR4 ECC RDIMM module

This A-Tech module delivers 4GB of DDR4 2400 registered ECC memory in a single 288-pin DIMM. It is built for servers and workstations that require error-correcting registered RAM. The single-rank x8 organisation runs at 1.2V with CL17 latency. It is not compatible with desktop or laptop computers.

Verify platform support for registered ECC DDR4

Before ordering confirm that your system accepts DDR4 2400 registered ECC DIMMs and supports single-rank x8 modules. Check the motherboard or server manual for approved memory configurations and population rules. The module will not function in platforms that require unbuffered non-ECC memory or a different DDR generation.

Upgrade from lower capacity or non-ECC DDR4

Adding this module increases usable memory for multi-threaded workloads and enables ECC protection for data integrity. The jump is worthwhile when your current configuration lacks error correction or has insufficient capacity for virtualisation or database tasks. Ensure the platform can address the additional rank and speed before installing.

特長

  • ECC protection prevents data corruption in server workloads
  • Registered buffering stabilises signals for reliable 2400 MHz operation
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Standard 1.2 V DDR4 voltage reduces power draw per module
  • 288-pin DIMM form factor fits DDR4 server and workstation slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-R
Part NumberAT4G1D4D2400RS8N12V
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitSingle Module
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and what else do I need to buy?

The box contains one 4 GB DDR4 2400 ECC RDIMM module. No cables or brackets are included; you only need a compatible DDR4 server or workstation with a free 288-pin RDIMM slot.

Should I choose a different capacity or rank for my server?

This is a single 4 GB 1Rx8 module. Select it when your system requires a single-rank registered DIMM at 2400 MHz; choose a higher-capacity or dual-rank module only if your platform supports it and you need more memory per slot.

What does the 2400 MHz rating mean once the module is installed?

The module will run at up to 2400 MHz with CL17 latency at 1.20 V, provided the server's memory controller supports that speed and the DIMM is seated in a supported channel configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。