暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 1Rx8 1.5V CL13 240-Pin Server RAM

SKU CH-F18Q-PFGDE

4GB DDR3 1866 ECC UDIMM with CL13 latency and 1.5V operation for compatible servers and workstations

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

Server Memory Module

This A-Tech module provides 4GB of DDR3 1866 ECC unbuffered memory for compatible servers and workstations. It uses a 240-pin DIMM form factor with a single rank x8 organisation and operates at 1.5V. The CL13 latency and PC3-14900E rating suit systems designed for this specification.

Target Systems and Limits

This module suits administrators upgrading DDR3 servers or workstations that require ECC unbuffered DIMMs. It will not work in desktop or laptop computers, nor in platforms that need registered or load-reduced memory. Buyers needing larger capacities or higher speeds must verify their platform supports such configurations.

Deciding Specification

The DDR3 1866 ECC unbuffered 240-pin interface is the single specification that determines compatibility. Only systems explicitly qualified for DDR3 ECC UDIMM at this speed and voltage will accept the module. Confirm the memory type, ECC support, and pin count in your hardware documentation before ordering.

特長

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose a single-rank x8 module or a dual-rank option for my server?

This module is a single-rank x8 (1Rx8) design, which places less electrical load on the memory controller and often allows higher total capacities per channel in DDR3 servers.

What real-world throughput can I expect from the DDR3 1866 rating once installed?

At 1866 MT/s the module runs at the PC3-14900 data rate, so peak bandwidth scales directly with that clock speed in your server's memory subsystem.

Does the 240-pin ECC UDIMM interface limit the maximum speed I can run?

The 240-pin unbuffered ECC DIMM form factor is specified for DDR3 1866 at 1.5 V with CL13 latency, and the memory controller will not exceed that standard rate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。